开云体育

John, As Peter has already said, JMRI can program CVs in ESU decoders. I've developed all the special JMRI code and definitions for ESU V4 and 5 decoders. My test systems are: - NCE Power Pro with

Clay, That is helpful.? So, the error is coming from CATS and not designer?? That would make sense, as I don't remember that designer had that kind of error checking on sensor and turnout names.?

On Sun, Feb 16, 2020 at 02:58 PM, John wrote: > > If you will NOT be using ESU decoders, then I would suggest a SPROG. I use one > for non-ESU decoders. ESU decoders need the LokProgrammer for

If you will NOT be using ESU decoders, then I would suggest a SPROG. I use one for non-ESU decoders. ESU decoders need the LokProgrammer for installing the sound files. I have both, I swear by my

On Sun, Feb 16, 2020 at 12:00 PM, <ktellis68@...> wrote: > > I believe I am experiencing the same problem as well.? I have PowerCab > version 1.65 and just recently purchased the NCE USB

JMRI supports a lot of different hardware https://www.jmri.org/help/en/html/hardware/index.shtml Most of the common systems will program most decoders. Do you have a DCC command station at present

ktellis68, Power Cab Instructions ================= The best beginner-level settings for a Power Cab (any version) and an NCE USB (any version) are: - All USB Jumpers off (or at least 2, 3 & 4. Jumper

I hope I’m not posting to a worn out topic but I need some information. ?I am wanting to set a decoder programming track to program decoders from different manufacturers. With the jmri software

That’s a great idea! I had done this before JMRI, don’t know why I forgot it this time! Thanks for this solution! Terry Cummins S.E. Michigan Sent from Mail for Windows 10 Sent: Sunday, February

Ken, this is a great service you guys provide! To this end I have some other issues with my panel that I need to ferret out before I would do this . But if I can’t I would like to do this in the

See, this is what makes this site so great! Method 1) Rather than using the association of the two turn out I could have just identified them on the panel with the same number. Method 2) make a hard

Some advice I was given was jumpers 3&4 on baud rate 19200. Start NCE Powercab, start computer, plug in usb and then start panel pro. It did work for me.

I believe I am experiencing the same problem as well.? I have PowerCab version 1.65 and just recently purchased the NCE USB Interface.? I am using Windows 10 and have the latest version of Java

In all likelihood, Terry is wiring his layout as indicated in -splasher's response: However, since he is asking us, the question posed by Peter is important. If the original posting is asking about a

Rodney, I've been helping Mark with CATS. I started a panel in Designer to show him how things work and when we tried to bring it up in CATS we got the error message he referenced in his post. When I

Terry, A lot of this depends on the hardware being used, if feedback is being used, and how you set it up in the panel. We'd need a number of details and seeing the panel file would be the best way.

Why not use the same power feed to both turnouts, that way they work in unison? -- -splasher in somd

Which panel editor are you using? How did you link the 2 turnouts together? Not enough information was given to provide a coherent answer. -- Peter Ulvestad JMRI Users Group Moderator -

After solving one issue with my panel I was setting a turnout that when thrown another turnout has to be thrown for the train to be able to continue. When I did this the first time I activated the

Updates to the issues I created with the migration of my new panel to an active layout. After many trials and tribulations I removed all my switches from the panels, logix, and tables. Then I rebuilt