开云体育

Is this true of Engine Driver? If so, Steve Todd’s Raspberry Pi image is great for clubs where members bring their personal equipment!

I still think it has something to do with either a setting or the video drivers or something on that particular series of laptop. In my case when I couldn’t transfer the image using the laptop I

correction: It is a layout editor (LE) panel. Chuck

The following issue appeared with installation of 4.18, was cleared by reverting back to 4.16: Context: simple panel editor panel, turnouts have no feedback. There are 2 double crossovers, this

Following along, it seems at some point I'm going to need to write some of my own logic. I learned Intel assembly language and QuickBASIC decades ago. But C and C++ stumped me. Is it realistic to

David and Mick, JMRI _intentionally_ changes track power status to "ON" at the end of a programming sequence when programming in "Service" mode. Further digging reveals that this code was specifically

Hi I've just tried to alter the Bridge Decoration line width using Layout Editor. This defaults to 1 and I wanted to increase it slightly to 3. However the dialog indicates that value must be between

I’ve also noticed that issue of track power being turned on while programming. I’ve wondered if there could be a transparency issue between the windows with a click on the program window directly

LH479 is not defined in SSL Inobu

Siglet start invoked for "LH497BlockBossLogic", but no inputs provided [AWT-EventQueue-0] Inobu

Check LH497BlockBossLogic That is the only error popping up. Inobu

Frank, I opened it, Mountain Division Panel, Traffic center,Valley Division Bakersfield North End, Bakersfield South A lot of stuff, it seems to be. I opened it via Digitrax sim to avoid an equipment

Frank, Are you seeing any errors on the system console? Help >> System Console. Dave Sand

Hello, I had a panel (three level) in JMRI.? I recently learned how to take sections of it and create separate panels for specific areas.? I did this, however those new separate panels show in the

That is what I was doing, but not working yet. Thomas Cain Indianapolis, IN atsf93@... See my NEW website and layout at: www.atsf93.com Modeling the Eastern Illinois Santa Fe from the

Mike, The "delay" option applies to signal mast logic. When an aspect needs to be changed based on SML rules, the delay defers the change. This applies to aspect changes, but unfortunately it does not

I am configuring a complex interlocking in Logix where I would like to delay signals "until the dust settles" after throwing turnouts. There are delayed actions for turnouts and sensors, but that

Have you tried it with the new PR?

Must be tired, just realized you don't want the "Run Excel Switch List" option. Dan

Hi Phil, Try "Run Excel Switch List". The help has the details. https://www.jmri.org/help/en/package/jmri/jmrit/operations/Operations.shtml#Automation Dan