开云体育

Dan, Upload them to the group's ProblemsBeingWorkedOn folder. If you have several, make a sub-folder. Dave Sand

I am reposting this as it seems to have gotten lost: We have a windows box which runs JMRI and talks by Chubbnet to a number of CpNodes. It is also connected to a ethernet hub and wifi router. The

How about reading all CV’s and saving file?Then do a new loco using the new template.?Then use the saved file to pgm the decoder? Jim K Sent from AOL Mobile Mail Get the new AOL app:

Have developed track layout using layout editor. All displays fine in edit mode; however, turning off edit mode only about 2/3 of the track is displayed w/o having to scroll. In edit mode, can zoom to

Now that the holidays are in the rear view mirror I can return to dealing with the issue our club is seeing when a configuration that loads panels crashes JMRI PanelPro and requires Java to be killed

Matt, It was shipped with Android 6.0.1 I'm trying to find the older install package and have reached out to ESU directly to see if they could provide it. Thank you for the information! Cody wrote:

George It's only the DCC controlled turntable that needs it I think.

See PR # #7837 ( https://github.com/JMRI/JMRI/pull/7837 ) It occurred to me after I submitted this PR that there also wasn't any code to draw the track in the turntable… I'm looking into it as we

Dick, I followed your advice about hook up procedure and it worked fine. I’m in the very early stages of learning this stuff but I did get control of my points from the laptop so I know the

Hi Ken, It turns out that I had a bad installation, but no warnings. I re-installed Java where I wanted it, and JMRI found it just fine. Thanks. Peace, Mike G.

Rai, Its ironic that you would post this you are our first tester. * Disconnect the coiled cable to the NCE Interface. * Start Decoder Pro and go into preference and make sure that the version setting

On starting DecoderPro, linking with PowerCab is made briefly and then goes offline, or simply stays offline. Pertinent facts: Last time used when on 4.14, no problems. Tried with two different

Marc, I did not post the correct link.. Thanks for letting me know. https://vimeo.com/382553929 Inobu

https://vimeo.com/382553929

*This is a clarification to my post from Thursday January 2* I ran a session and terminated all the trains.? I shut the system down and then called up the system back up to make a change in a

Mike, You need to install Java first, that way the paths are setup for other programs (like JMRI) to use. So I would simply uninstall JMRI, then try reinstalling it. Hope that helps, Ken G.

Link not working for me on two different Computers. Marc

Bart I cannot recreate this problem. After you do the "?Create New Action" and nothing seems to appear do alt+tab to get a list of the open windows and see if its listed (Add Action). If you are

No problem reading/writing decoder CV ( the supplied example came via Railmaster, I've done this for all my locos, one of which has a DCC23 the rest have the Bachman 36-558 decoders) thanks - Richard

Thanks Steve.