开云体育

Found this a bit of an intriguing problem so I tried to replicate (which I did - but also found the solution).? Using s.brackstone's Arduino code as is, I just set up two turnouts using 2 bit

Dave, I look forward to getting home and trying this, though I am not at this point optimistic. ?Meantime, I looked, and those two drivers I had earlier installed seem to be missing, but there is

PS that is a windows file restriction has nothing to do with jmri Bobby Abrams [email protected]> wrote:

the name length restriction is 256 characters starting with c:\ if this really is a problem change the directory where you keep the files Bobby Abrams [email protected]> wrote:

Not quite clear. You ask 'HOW'? but you also say you 'HAVE' set each card ID#. You can not use JMRI to setup the? BXP88 as we could the BDL168. Digitrax changes. You can use the JMRI Turnout

Thanks Bob, is there a link to the documentation that would explain how to do number 2? Jim Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows

JMRI 14.17.7+R5bc91de, Windows 10. Using the Config Profiles screen under Preferences, when I try to copy a profile named SPROGSim-CMRICom7, I get different behaviors depending on what I name the new

Thank you, Bob. I have updated my RPi-JMRI image for the RaspberryPi to include JMRI 4.17.7, and published it here: https://mstevetodd.com/rpi Hopefully, some users will be able to load this and

Andrew, This indicates you've got obsolete SiLabs drivers hanging around, probably in "/System/Library/Extensions/". Delete all existing SiLabs drivers from both "/System/Library/Extensions/" and

See PR #7734 ( https://github.com/JMRI/JMRI/pull/7734/ ) : “LayoutEditor-Add-ability-to-rotate-entire-layout”.

Sorry, here is the log: ? 10 apps.AppsBase INFO? - This log is stored in file: C:\Documents and Settings\KAREN\JMRI\systemfiles\messages.log [main] ??? 80

Hi, I have no idea what happened. It was plugged into the cab buss, so I guess nothing should have happened. I still got the timeout status. after finally hooking things up the proper way - using

If you don’t want the Approach (yellow) to show, you could 1) Not have each mast protecting the following one. Just delete those references. or 2) Configure your mast definitions so that the

JMRI Ver 14.7.3 Windows 10 Why is the block values being cleared during startup if track power is already on?? ?This does not happen if track power is off. Roger

Ken and Mike, I assume that question was meant to be directed to Mike? I'd like to know the answer to that as well. Dave in Australia

Not a JMRI related question. Suggest you try the Digitrax forum: /g/Digitrax-Users -- Peter Ulvestad JMRI Users Group Moderator - http://www.jmri.org ( http://www.jmri.org ) Tam

Using Digitrax DCS210, DS64s (4), and BXP88 (2) question is how address the two BXPs, each with eight zones, have addressed each BXP ID #. Thank you -- Allan Altheim Pioneer Museum Model Railroad

Here's the last couple minutes, while I was in the Create New Loco window trying to write the decoder address to the loco. 2019-12-17 10:17:44,336 util.Log4JUtil ? ? ? ? ? ? ? ? ? ? ?

2019-12-17 10:17:44,336 util.Log4JUtil ? ? ? ? ? ? ? ? ? ? ? ?INFO ?- * JMRI log ** [main] 2019-12-17 10:17:45,334 util.Log4JUtil ? ? ? ? ? ? ? ? ? ? ? ?INFO ?-

*Marc, * Yes, I can acquire, read and write with PowerCab on the Programming track. ?Not convinced yet that JMRI and PowerCab are talking.