开云体育

Jim, And you can print a switch list for each location in the train's route? Can to send the manifest print to file?? Does that work? Dan

If you put double quotes "like/this" around everything if you're copying from a Windows command prompt, it will pick up everything.

I just installed 4.17.8 on Windows 10.? WiThrottle is broken.? I can start the WiThottle Server and it advertises it self correctly - on my system it is 192.168.1.75:12090.? I use Engine Driver on

Dave and Ken, Yes, what you described about the sequence and the Cab Bus LED fixing on is accurate. Also, after two tries to communicate, the two bits of text at the bottom of the Program screen go

Andrew Well I thought it was relevant, but obviously not, it was the 1st time I'd posted. Regards Roy

Roy, Roger that. No worries. i’m new too, and just learned something. Good luck, Andrew

I'm going to be curious how it looks. I can see transposing the track elements fairly straight forward. But all the labels around those, that's what I'm not sure how well a tool will do that sort of

Spuds, I expect that the rotation will be a one-time event, then you'll save the newly-rotated panel(s) to a new file. So you could make that change at home using a nightly release, then copy the file

Steve, My primary advice is to look at the track and decide where you think a train should stop. Those spots need to be block boundaries. Next consider where you think one train may be running near

Hi New Layout ! I want to ensure I have the best chance of running auto trains with Dispatcher and I would like to address as many issues at the design stage before gluing track to board! Please could

Switch lists print fine.? Print Manifest generates a WIndows error when sent to printer. Confirmed that the setting for switch lists is Same As Manifest. Console log info: 2019-12-19 09:24:03,376

Please delete Really sorry, new user.

Oh ok, sorry about that.

Please do not hijack someone else's thread. Not only does it distract there, but (for you) more importantly, your problem will not be seen except by those following this one. The thing to do is to

I'm having a similar problem and not very experienced with saving and deleting software. I've downloaded the zip file but when I try to install the software it tells me my laptop is unsuitable. It's a

Ken, Since we've resolved the baud rate mismatch between JMRI and the jumper settings (earlier logs), there have been no garbled replies at all in the later logs simply a failure to reply at all for

Tony, To move cars from one location to another, in the Cars window, under tools, is the Set Cars tool.? You can select as many cars as you want and move then all at

Hi Reg, A couple of questions that might help diagnose your issue: 1) Using the JMRI Throttle Window, try the same loco and see if you get the same results. 2) Do you get the same results on multiple

Reg: What command station? USB implies PowerCab or SB5... In general I know of no reason why you should change the WiFi port... 12090... default on WiThrottle...Did you change the prefs on both the

Andrew, At this point being able to swap the USB or PowerCab would be great. That would mean finding somebody near you with the same hardware and trying over there. If you say where (generally) you