开云体育

No, works on Windows versions just fine. David Klemm

Dave Panel file uploaded to the same folder. File name Spokane Division.xml. Thanks for your help. Brian Clark

Jerry, Have a look in the Task Manager and see home many copies of Decoder Pro are running.? If there is more than one get rid of all but one copy.? Hope this helps. Paul

Gentlemen Is it possible the problem may have something to do with Win 7 Jerry

Brian, I suspect the problem is not the script but how you are invoking it. To check that out, we will need to see the panel xml file. Dave Sand

Peter Amended back as suggested. Script is already in the user files location. No change in behaviour however. Brian Clark

Jerry, Reinstalling almost always is a bad idea. The error is telling you that the programmer is already running. I see that when I click read or write multiple times. David Klemm Sent from my

Marc Ver 4.16 NCE Pro Cab NCE Pro Cab Wireless TSU PNP When attempting to read or write I get the following statement " Exception during read; programmer exception : programmer in use In addition I

I would suggest you change any SetBlockValues2 in your script back to SetBlockValues. You seem to be using both and that is possibly the issue. If you haven't done already make sure your

Tony, I have to disagree with everything that you stated.? The program can pretty much do everything you described.? The program can use up to 5 trains to move a car from one location to another,

Dave Thanks for your help I have uploaded the file into ProblemsBeingWorkedOn new folder Brian Clark I thought I had been careful not to alter anything I didn't understand, but seemingly not. Look

Dear dan I haven’t yet reached trying to sort with schedules and loads but based on what you say here i assume that a car with a load cant travel from/to or thru a classification yard or large

Post lacks much detail for anyone to help you. What JMRI version ? What DCC system ? What Programming device ? What decoder ? Post the System Console Log from HELP, System Console Marc

Frank. look in your inbasket (unless it got blocked) Marc

I recently made changes to the functions. When I went to write changes or read changes the page remained in the idle mode and the changes did not occur. I then tried to change the CV with the same

Brian, The script is designed to be started one time after the panel xml file has been loaded. Each time the sensor is set active, it looks for occupied blocks that have no assigned value which

Frank, Your responding to someone else's thread. If you have an issue you should start a new topic. -- Peter Ulvestad JMRI Users Group Moderator - http://www.jmri.org ( http://www.jmri.org ) Tam

Sorry I could not respond sooner. ?A few health problems. ?THE MANUFACTURER is TCS. ?IT IS a TCS KAM4 1485 four function (M4 decoder with KA2 Keep-Alive). Somehow I need to back up the CV's for

Blueline... Two decoders! The DC/DCC sound only decoder is the one that came in the engine and you the user needed to add the DCC motor decoder. Not sure just what is wrong but the second decoder is

Any thing is possible..Pleasures of not having the decoder in hand. The NCE Powercab has this Standard Programming setup for decoders and first thing it does is determine the decoder manufacturer. So