开云体育

Bob, I'm confused. Sleeping on it didn't help..... Your analysis is clear, except for one thing. You seem to be saying when Gerry set the screen throttle to 28 speed steps the message was in 128 step

Hi Marc,Thanks for the info, however I'm still having problems. When I try to install 401704(and 4.17.3 for that matter) I get the following Windows notice: Windows cannot access the specified device,

I recently had the same problem. Just two wrong user clicks and user has problems. This is an application error and should be fixed. -- Petr ?ídlo Czech Republic

Thanks Dave that would be it I was drawing a shape but then changed my mind and deleted it. must not have deleted properly. Thanks Tim

Mike, Once Operations Pro is showing Select (top right hand 3 vertical dots) "Share" or "Print" Select your printer from the available share list. Click on the printer and select "Save as PDF"

FYI -- Czechoslovak State Railways -- mechanical signals https://www.jmri.org/xml/signals/CSD-1962-mechaniky/index.shtml -- Petr ?ídlo Czech Republic https://sites.google.com/site/sidloweb/

I want to save the Ops manual to my reader (samsung android) so I can read it while on a long cruise. I cannot find it in PDF format and each time I try to save it from within the manual I end up only

Tim, I have been doing some more research on the problem. It appears that you have an incomplete shape on your panel. The shape section probably looks like the following: <layoutShape ident="S2"

It will take me at least until tomorrow to wrap my mind around all this, but there's a lot of good info in these messages. I think you're saying I can't control my LE103s because JMRI is using 128

Tim, If you are running Windows, use the file manager and navigate to C:\Program Files (x86)\JMRI\xml\schema\types and get the file size for editors.xsd. Also, let us know the version of Windows, the

First let me make a public apology to everyone for making free with bad advice! Neither of the utilities I posted support sha256 checksums. Here are two that will: https://www.7-zip.org/

Dave, "Hopefully the operator knows that the diverging turnout leg is the main route and therefore Closed is the proper state for that turnout in order to remain on the main route. If they insist that

Hi all I am getting an error when I have saved a panel in JMRI after adding things. it appears to add into the layout shape section of the config file the words "Points/" before the end of the

Robin, That is doing exactly what you want. Closed is applied to the main route that proceeds through the diverging leg of the turnout. The layout matches the panel and the proper aspects are

On the old computer, start JMRI and do “Export Complete Roster” (Note “complete”) That will ask for a location and then store a file there. Move that file to the new computer. On the new

Hi.? I bought a new laptop and need to download my JMRI roster over to the new computer.I went to download my roster from the old computer to a flash drive and thought I could simplyupload to the new

Dave, Thanks again. I ran your demo and it works the same as my panel. When the Turnout position in the Turnout Table is set to THROWN, the Layout Editor draws the turnout as set to the straight

Marc When you select the screen throttle - on the left of the throttle there is a slider - right click on the slider, under properties select "display speed steps". You can select 128 or 28 speed

Hello Jan and all who have been helping me. ?I called the APPLE tech service and they provided an option to download which was found to be missing (somehow). ?ALL IS WORKING FINE NOW. ?THANK YOU

Bill, As it turns out, my old style is no longer relevant. I have replaced the run/skip style with a program address style. The actionTokens list is now treated as a computer program with control