开云体育

Hi Keith, The WiThrottle Server sends the current roster when a client connects, so we need to make sure you're actually disconnecting and reconnecting. Can you describe exactly what you mean by

Perhaps one way to script this would be to use the LocoNet Monitor with the show-raw-data box checked to get the exact sequence of LocoNet messages you want sent. Then jython/LnFindTransponder.py or

Gentlemen, If you are able to provide help in scripting the configuration of a Digitrax SE8c, please keep reading. Our club uses TrainController Gold for signalling, occupancy, and turnout control on

Club layout running release 4.17.3 with a DCS 100 command station connected to a Win 10 PC through RR Circuits LocoBuffer. Somehow not connecting to track power. Stuck on the 'unknown' yellow. Could

I am interested in the ability to generate NCE macros from a JMRI WiThrottle Client throttle.? In this particular case, the NCE macros are only being used for turnout control.? It looks like the

hi there i have 3 layouts each with a different roster and name i set up WiThrottle using one of the layouts and it loaded the roster into wi throttle and all worked fine when I switch off this layout

When you drag and drop the picture from some folder on your computer into the media tab a copy of the picture is put into the roster folder. wrote: -- John Griffin *_______________________________* If

I see the small picture as an icon in the roster list. What is the large picture used for? I see?imageFilePath="preference:roster/picture.JPG" ?in the roster file. Where is the picture actually

The first thing you should do is try the other ip address ( 192.168.1.156 ) and see if it works. If that doesn't help we will need to know the release number of the version of JMRI running, and you

Hello again! Sorry to be THAT guy, spamming the forum. As of late, I've had a burst of time and energy to get stuck in to my trains again. I have a few "simulation" events I'd like to impliment while

Hi Dave, I gave the simplifying logix a go, and it still gave me the same result. I haven;t delved into scripts yet at all, so I'm a little hesitant. What would the method be in implimenting this? --

Hi Dave, Just downloaded the latest Jenkins release. Issue with assigning sensors is resolved! -- Thanks Mitch

Hi Paul, This has happened again. I just updated JMRI to 4.16 and the id tags window is completely blank again. The xml file is actually still populated. It seems as if PanelPro is not reading the tag

All, Do we have an Order Board Signal for our panel editors?? I've looked and have not found any in the icon directory. Roger

JMRI 4.12 on a Raspberry Pi3B.? This used to work and I have not made any changes in the meantime.? I have no other issues with any of the functions I use in JMRI - detection, signalling, etc. all

SO, I had a spare DCS50. Swapped out the old one. All works fine now. Hardware issue. Will be ending the old DCS50 to Digitraxx for repair. Thomas DeSoto, TX

Thanks. I got all the clocks to sync with the LocoNet Fast Clock time source, and then hours of checking and unchecking all the other check boxes on the Set-Up Fast Clock dialog until i found a

In the -Fast Clock Setup- screen the first item is -Time Source-. Selecting -LocoNet Fast Clock- should do what you want. Confirm your LogicRail fast is configured to slave. -- Peter Ulvestad JMRI

Thanks Bob I am actually starting to use your USBthrottle.py, not least if the concept works I can replace it with an Arduino. Peter L-J

Wi throttle is on port 12090. You normally start the Withrottle server, then connect the phone / tablet. The web server is not required unless you are accessing panels etc. Mike