开云体育

Unable to open a throttle. Win 10, Locobuffer USB, DCS 50, BDL 168. error is "Failed to get response from command station". Note that programming track is working as expected, and track power can be

Hi Bob What is the feedback you are using? Steve G.

I think deleting decoder-index.xml has solved the problem. ?I've opened several programming windows. I'll inform of any further problems of they occur. Thanks so much for your help! Rick

It has been an ongoing but occasional issue. I had the problem occur with my previous layout. I am building a new one and it seems to be occasionally occurring again. Robert J. Perry, O.D. 540

Hi Bob It sounds like the feedback mode, or feedback hardware, if any, is tad wrong. If you don't have feedback sensors then with loconet you can use "monitoring", "delayed" or "direct". Was

I do this with my arduinos: relays servos signals....there's a default startup routine

Easy way to initialize a layout is to use an LRoute that is set to be 'Initializer'. You can pick the turnouts and choose which setting you want them to have. It will send the closed or thrown

Marc, There is no need to change the User Files Location. But many users change it for one or more of the following reasons: - The desire to share roster and panels between profiles. - The desire to

You are correct that? I have not changed the User Files location in any of my created Profiles. Where is the need to change this stated in JMRI ? I am well aware that YOU prone this change. If my

Marc, I did not read you wrong. I'm afraid your are being confused by the fact that your setup is the default one that has "Profile Location"="User Files Location" In that case it appears that the

You read me wrong. I do not change the USER files location, so it follows the PROFILE. An imported definition file goes in the Profile location? into? "Profile"/decoders. The decoderindex.xml? is

Marc, If you want to see how this works in various circumstances, go to: https://github.com/JMRI/JMRI/pull/4372 Then download the "Tests.zip" file in the leading comment, unzip and import those roster

Marc, This is by design. Profiles are sacrosanct in JMRI. No JMRI instance is permitted to access other User Files outside its profile unless explicitly instructed by the user to do so (by the user

Is there any script that can send a signal to each tortoise upon startup to close so that JMRI can then see the position? (Or would that trigger the same problem?) Otherwise I believe you are

Marc, No doubt, but it's difficult for me to look at this file on my sole device at present, an old iPad 2. It's one of those things worth running periodically as a maintenance tool. Correct. If it

This also, I discovered, only applies to the currently? ' Active Profile '. It does not carry over to other Profiles one might have defined. So a NEW imported definition one adds to Profile A, will

So that would involved files named like this :? SoundTraxx_Bachmann_SndVal_Dsl_deprecated.xml I found the " Update Decoder Definition "? to not be very clear as to it's use:? when to use it. Also

Hey guys! I'm using SML for my signal system, based on BR-2003. I have feathers, which i contorl by logix (if signal is not red, and turnouts set (x) then feather on. if signal red OR turnouts not set

Marc and Rick, The "Update Decoder Definitions" process is explained at: <https://www.jmri.org/help/en/html/apps/DecoderPro/CreateDecoderAdvanced.shtml#update> But I'm not currently in a position to

Marc, If the old definition name had been deprecated correctly, "Update Decoder Definitions" should pick the correct new model. Dave in Australia