开云体育

Mitch, I loaded your panel, deleted all of the signal mast logic and did the automatic generate successfully. The screenshot is curious but does not show the environment. If you have the JMRI console

Hi Dave, I have uploaded my XML file, shorty followed by a screenshot of error messages. -- Thanks Mitch

Mitch, Screen shots are uploaded to the group’s Photo area. If you upload your panel xml file to the Files ProblemsBeingWorkedOn Folder, we can see if there is a data issue. Dave Sand

The plot thickens! The Discover Signal mast does not seem to work anymore, and if I have the message log open, it throws an error and crashes. Same error as above. I have a feeling that my file is

Jeff, I can send you privately some instructions for a non-JMRI test of your serial connection to the Power Pro. That takes a big set of variables out of the equation. But I'll need to fit it around

I don't bother with OpSw 36 but instead use OpSw 39 two or three times a year at my club. We do not disconnect or touch anything on the command station. Using LocoNet >> Configure Command Station 39

Jeff, It sounds like we are not getting to the USB device. But there are a few options left to try. 1. Create a new profile to get a fresh start. Just in case something is in the existing profile

Based entirely on experience with DCS100/200 Command Stations, but using PanelPro with JMRI version 4.17.3 and several previous versions, there is something important to add to [Billybob's excellent

Hi Marcus, Sorry, I have obviously assumed far too much knowledge of things I've been immersed in for 40 years (though I'm 60 myself and semi-retired, this is my trade more or less). It is a fact that

Hi Charles I am a model railroader with a Laptop connected to my layout to make for easier programming of decoders. What is an “MD5” an “AV” a “checksum” a “mirror being compromised”

Thanks for the replies, guys. I probably did a poor job of explaining the situation in my original post so let me try to clarify I have two flatcars. They do not travel in a kernel. Here a the

Surely you can override this warning with most AV products? I would have thought you can obtain an MD5 checksum of a known good copy of the installer, check your download against it, and if all is

Marcus, I get a similar message if I download and install the day an update comes out. I use Norton and on the pop up click the down carrot and chose install anyway. Does you software have a similar

Hi Mike Thanks for your quick reply, it allowed me to review “your” discussion that I had seen but I did not “comprehend”, as I have other issues going on. Reading the discussion, it seems

Gerry, The EasyDCC Command Station has V629 firmware. According to EasyDCC Tech Support, that should work fine. The latest is V631. The only change, I was told, is that now the Command Station

Hi Stewart Until someone writes a Decoder Definition for the decoder, there’s nothing available, see: http://members.optusnet.com.au/nswmn1/48Select3.htm Regards Marcus Layout Video

Hi Marcus,I've been having the same problem, I cannot install on either of my Win 10 machines. I am using Avast anti virus. I have successfully installed on one Win 7 PC and? one Win 7 laptop. (I

Some of the systems include semaphores such as BR-2003 and BNSF-1996 for example - there may be others. Which system do you require?

Hi All Why do I get this " FileRepMalware" message when I try to "execute" (click on the .exe file) after downloading the latest two versions of JMRI when I try to upgrade Decoder Pro, using my NCE

Hi, I have encountered a decoder that jmri reports back as a: Regal Way co. Version 106. Is there a defintion for this one? It is the OEM decoder in a powerline models T class locomotive cheers Stu