开云体育

Dave in PA, Yes. It's actually the Cab Bus (the 6 way socket on the Power Pro) that connects throttles, AIUs, Mini Panels etc. to the Command Station. NCE uses the term Control Bus (the 4 way socket

Hi Klaus, Thanks a lot :-) I will have a look at both these examples they will make it much easier for me to try to accomplish what I want :-) Best Regards P?r

You're welcome, P?r! I uploaded a variant of the script (SensorTransponding.py). Both scripts work for me in JMRI simulator mode. Please check the line endings, if you are not running Windows. The

I have the same problem. Although the catalogTrees.xml file is created, the image index is lost between sessions. -- Petr ?ídlo Czech Republic https://sites.google.com/site/sidloweb/

Thank you for your reply Dave. I cannot find a way of selecting and dragging the end points. In the Help files it talks about using a META key but I have tried several keys CTRL ALT Fn but these do

Thanks Dave, Ken and Dick So my problem is the use and definition of the word GND. Where as the GND for the AIU comes from the Control Bus? The GND on the BD20’s comes from where, the AIU board? And

Peter, The length and angle of turnout, slip, and level crossing legs can be changed by dragging the end points. For you scenario I place the turnout and the slip on the panel and connect the related

Hi Klaus, Thanks a lot for the swift reply ! Best Regards P?r

I am having great difficulty in connecting the above objects. How do I get the alignment of the turnout diverging route to match that of the slip? The angles of the diverging lines wrt their through

Thomas, You're nearly there. That checkbox should add some extra columns to the table. The ones you are most interested are Feedback and Mode. For each and every Turnout in the table, (in the MODE

Dave, Where do I select Monitoring in JMRI? Is it a drop down menu item? In my turnouts table I see a ‘check box' called “show feedback information” but it did nothing. I’m guessing that this

Tom, The PR3 is a combination LocoNet to PC interface and *stand-alone* programmer. Using a 16-18VDC power supply with it does NOT "add more voltage to the layout". Steve "Breezlys"

Thomas, The NCE command station monitors the last-commanded state of each of the 2048 possible accessory addresses and stores that in non-volatile memory. This covers throttle commands, NCE macros,

In the past someone suggested old laptop power supply. I have one that works great for me. Fits the PS3 or 4 perfectly Kurt Konrath

Tom, PH Pro and PowerHouse Pro are just a slight name change that happened along the years. Key difference is it is a big black box with a serial 9 pin port and not something you use the NCE USB

Dave, I’m not sure from your note as to where Monitoring is done, JMRI or NCE. I saw this in the link you provided: MONITORING Default for LocoNet and XPressNet turnouts, this means the network is

Dave, Part of the problem is that different people use the term GND differently. In this case we mean the common return for whatever switches or detectors are being monitored by the AIU. We do NOT

Dave in PA, Yes I saw your other comment about 'where the gnd comes from'. For the AIU with respect to the Tortoise, it is the first pin of the connector with the other 7 inputs. While the gnd on both

Dave, For each Tortoise, both of those connections must be removed and replaced by a separate (otherwise unconnected) direct wire going between pin 5 and the single relevant AIU GND. Dave in Australia

Dave, The AIU GND is connected to the NCE Cab Bus ground and hence to the case of the Power Pro. No connection is to be made between the AIU GND pins and anything else except the ground returns of all