开云体育

Thanks Dick. I do have Digitrax. Sounds like I better skip 4.16. Rock Sent: Monday, September 02, 2019 10:34 AM To: [email protected] Subject: Re: [jmriusers] Current Version?

Rocco, 4.16 is indeed newer than 4.6, (many years newer) but be aware that 4.16 has a serious bug in the default baud rate setting area. (It affects CMRI, Digitrax, and possibly other interfaces) You

Dick Can I use the motorman I have or do I need to get a towerman? Steve Pustay

Thank you.? We'll check on this today. Frank

Good Idea, Thanks for the info!

Yep, my bad. Thanks Sent: Monday, September 02, 2019 10:02 AM To: [email protected] Subject: Re: [jmriusers] Current Version? Rock, 16 is higher than 6. David Klemm Xs Max

oops!

Rock, looks like you are 10 releases behind, download 4.16, install into present directory, check you have latest Java installed, install if you don't, open DP again, query the decoder again. In

Rock, 16 is higher than 6. David Klemm Sent from my iPhone Xs Max ________________________________ Sent: Monday, September 2, 2019 9:48:42 AM To: [email protected] <[email protected]> Subject:

Rock: 10, ten... slow on the uptake today... Jim

Rock: 4.16 is the current release version... 8 bumps up from 4.6... Check the notes for special instructions that might be needed for that jump there's been a lot of changes. Jim Albanowski

Gentlemen, I need a little help with two questions: 1. I went to the JMRI web site's down load page and it says that the current version is 4.16. If I start my version on my computer it says that I

Tried to upload but it failed twice.? First try was through the "browse" window, second with a "drag" move.? Program (not computer) locked up. Conrad

Klaus, You are correct, I do have a click in notch 2.? my mod consisted of making a separate EMD645 file by removing all the other locos and changing the notch setting points to 10, 20, 30 & 100.?

Hi, I am a novice user of OperationsPro (OP) and an intermediate user of CATS.? I?have used the latter to dispatch several operating sessions now, but I am just in the process bringing OP into the

Steve, I think all you need to do is plug ribbon cables from the translator to a TowerMan, (or other I/O port) one cable for controlling the color, and the other for outputting the commands. The

To run my version, you will need JMRI 4.17.3, Steve is running 4.15.9. In either case, you will need a profile that has the connection set to "DCC++ Simulator". Dave Sand

Guys, New to Panel Pro, are there any videos on how to use Panel Pro? I’m having a hell of a time getting one setup. Wayne Snyder

Hello, Dave and Steve. I continue to get the same parse error, with all of the xml files the both of you provided. My JMRI version is 4.14+Rd060e0b, is that a problem? And I'm offline, the "about"

I am attempting to begin automation of the trains on my layout using jmri. Currently I have enabled block detection using RR-Cirkits watchman connected through RR-Cirkits Locobuffer USB. All is