开云体育

Jim, So do they identify themselves as MRC or something else in DecoderPro? -Ken Cameron, Member JMRI Dev Team www.jmri.org www.fingerlakeslivesteamers.org www.cnymod.com www.syracusemodelrr.org

looping sounds can be somewhat problematic. As already stated, wave files mst be the same format to avoid problems. Another thing that may help is to establish the cut in/ cut out points in the wave

I have purchased 5 of these decoders from the seller. XL manufactures the decoders for MRC and come with full warranty , basic instructions shipped in static free bag and return policy is 9$ return

Please note that dialogs triggered on the JMRI native panel (regardless of what triggered them) block the panel from updating, so the web panel (from either the /panel or /frame URLs) 1. does not get

Searching within eBay for "ho dcc sound decoder with speaker for proto 2000" hits a bunch of these with different form factors. All about $30-$40. Going back to my original question, does JMRI support

Thank you, Wouter, for your intervention. However, the topic may be closed now as far as I am concerned. Bob, Paul, You should have left me in ignorance, a bliss. The more I have learned on the theory

Hmm, different seller to the previous item number, and it is a different item to the previous one as well. As to the epoxy covered blobs, Chip On Board (COB) is fine if done correctly, and is

Scott, You will need to use the 4.17.3 test release to run CMRI at speeds other than 9600. Dave Sand

Rich, I'm not near my layout computer so I can't check the other settings, but the COM port depends on what Windows has assigned. Open Device Manager, expand the ports section, and plug/unplug the PR4

I'd stay far away.? Googling the UPC they have listed turns up an MRC decoder with a different form factor. Something's definitely fishy... Steve "Breezlys"

I am running JMRI on a Windows 10 machine talking to an NCE system (9600 baud), and CMRI (19,200 baud).? Although it's not clear to me that there is linkage, I recently upgraded to JMRI 4.16, I

How do I delete panel files from panel pro? I have JMRI v: 3.10 installed on an HP Pavilion running Linux Mint 17.2. Setup in simulation mode for NCE and C/RMI systems. A few years ago I started going

The look like MRC decoders to me. Steve Lowens

Dave, Thanks for the videos. I tried the same turnouts you were toggling and the web panel works for me if I enable the proper sensors. Hopefully the upgrade will help, I don't recall you telling us

Don, you may have posted into a previously running thread.... but what you propose sounds like a reasonable approach to update an air-gapped Rpi.

Any decoder with a blob of black epoxy I stay away from. Learned that in my early days of DCC. It's cheap for a reason. John

Thanks, Steve. Looks like it's time to update!

Hello Group, I'm still having problems with my PR4. After a day of JMRI and the PR4 working correctly I'm now back to square one and not able to read read or write to any of my decoders. Someone

It was relisted.?233324627381 Rs

Here's one item number I found 123885233171 Not impressed. -- John Griffin *_______________________________* If today was your last day...