开云体育

Hello Alan, reading CVs by directly using the keypad on the Twin-Center works as expected. I can hear the relay switching the program track on when I enter programming mode and all basic CVs read and

(Separate reply in case it becomes a separate thread) I think the goal is to create “how JMRI works with MQTT” without a lot of attention to the (very small) number of existing setups. Any

I only have one BLI loco, Mikado, I have not had any problems what so ever reading or programming this loco. My secret to programming locos, any brand (I haven't tried MTH though) is to use JMRI and a

Robert, Just a few questions on your process.1. What type of DCC system ?2. How is it connected to the computer system. (Locobuffer USB for Digitrax or PR ? from Digitrax) or a PB100 from NCE.3. If it

Two examples: If the system letter is M, then: *) MTfoo/bar/biff/21/mine is a turnout that uses foo/bar/biff/21/mine as the MQTT topic *) MSrailroad/stuff/notMentioningSensorsHere/yardOSwest is a

From: Classic Auto Portraits <mailto:classicautoportraits@...?subject=Re:%20Broadway%20ltd> Date: Wed, 09 Jan 2019 09:32:45 PST Dear Mark, et. all, I have a Digitrax DCS240 command station, with

On Wed, Jan 9, 2019 at 10:19 AM, Kevin wrote: > > Hi David > ? > I’m a UK modeller too, and a JMRI user. I’m struggling to work out why you > are looking at DCC++ on an arduino when you already

From: Classic Auto Portraits <mailto:classicautoportraits@...?subject=Re:%20Broadway%20ltd> Date: Wed, 09 Jan 2019 09:32:45 PST Dear Mark, et. all, I have a Digitrax DCS240 command station, with

Hi David I’m a UK modeller too, and a JMRI user. I’m struggling to work out why you are looking at DCC++ on an arduino when you already have a Dijikeijs DR5000. The DR5000 will act as the DCC

I've got a number of BLI engines and no problems programming them using JMRI.? I'm using a Digitrax DCS100 command station with an isolated programming track with a PowerPax programming booster

I totally agree with Bruce, get a Soundtraxx PTB 100, for your programing track. Money well spent.

Chris...another important item (just in case). You need to load a panel first THEN your tables will show up. -- Paul Davidson Washita & Santa Fe RR N scale:? Southern Oklahoma circa late 70's

I have heard of a person with an IB-IR having exactly the same problem on the IBX mailing list, but they claimed their unit had been working. The obvious first question is what result do you get if

Dear Mark, et. all, I have a Digitrax DCS240 command station, with an isolated programming track. I have constant issues attempting to program BLI locomotives using JMRI. Many will not recognize, read

From: Classic Auto Portraits <mailto:classicautoportraits@...?subject=Re:%20Broadway%20ltd> Date: Wed, 09 Jan 2019 08:35:59 PST Dear Robert, This seems to be a problem encountered often with many

SoundTraxx PTB 100 On Jan 9, 2019, at 10:20 AM, Classic Auto Portraits <classicautoportraits@...> wrote: Dear Bruce, et. all, Can you or one of our members recommend a programming track booster?

Dear Bruce, et. all, Can you or one of our members recommend a programming track booster? Regards, Robert Diepenbrock

There is no way to have a short address of 174. Only seven bits of CV1 are used for the address. Thus, the maximum number is 127. One thought I had: are you using a programming track booster? On Jan

Robert, I don't know of any system that supports 174 as a short address. AFAIK, the NMRA standard says all with the long mode address from 128 and above. -Ken Cameron, Member JMRI Dev Team

Chris, Are you sure the panel file is being loaded at startup time? -Ken Cameron, Member JMRI Dev Team www.jmri.org www.fingerlakeslivesteamers.org www.cnymod.com www.syracusemodelrr.org