开云体育

Hi I have 3 problems with setting up vsdecoder on my raspberry Pi3 runnning Ubuntu and jmri4.12. Problem 1. I have the Start VSDecoder Manager option in startup and it reports: ? Error on line 2:

Sounds like one of those expensive Fluke Scopemeters.? Useful for an electrician, not useful for much more. They are just a little too crude to be useful beyond the MRO field. You want something that

Maybe I'm missing something, but why don't you just carry the laptop up to the layout? Steve "Breezlys"

Bug. The program only looks at the number of cars departing staging, and not if any are in a kernel.? Sorry about that. Dan

Jon: I've also mention scopes a simple hand held and? Velleman too... No longer available... $130 many moons ago... Having used some rather high end Tek scopes this little scope is not much more and

I've been using Android tablets for a couple years with much success.? Most of what I read in previous posts is right on.? I have as many as 19 panels available on about 10 tablets around the

The good news is that the basic pausing seems to be working fine in 15.1 and I'm now refining the use of it to control trains with a fair degree of success. I think it was in one of the 13.x series

Don W, I've written panels over 5000 wide and 2000 tall. Takes a lot of scrolling for some of the tasks. By design, I'm not sure there is a limit on size. Granted it does get a bit awkward as they get

I realize the panels are unitless, so the dimensions aren't "real". But, there are the issues of how coordinates are stored, so JMRI probably has some grid and panel size limits. Likely limits are

Hi Andy, Just took the time to read that little saying after your name. Pretty funny. Gordon Spalty

Thanks for the reminder. I am just concerned that realistically modeling and operating trains (and using JMRI ) was becoming much more focused on having substituted wireless mobile 2D approximate

Think I have worked my way thro that problem, now some of the throttles created will not save the changes I have made ? Any suggestions please?

I don't know where we're at now with the MQTT extension proposal. There has been some discussion and ideas floated for using JSON format for the payload. Here are more ideas using JSON. I don't know

Hi Guys hope you all had a good hols? With some time on my hands I thought i'd put it to good use and play with jmri. The subject creating throttles and assigning the correct labels to the buttons

Many thanks Paul, I look forward to the fix. Meantime Happy New Year to one and all. Tom

This happens because you are using a Compact which doesn’t provide support for sending raw packets to the rails. BUT you shouldn’t get this Error message because the command station option should

It goes by so fast it’s hard to catch under normal conditions. One way to see it is to power off your C/MRI node while JMRI is running (also works to unplug the RS485 cable). The node will stop

I feel like we're going around in circles now ... I had accidentally knocked the power wire off of the rs232/rs485 board ... reinstalled and everything was back to original problem ..as stated in

I've seen that happen as well. Fix for that is to attempt to delete both and normality returns (probably after a roster rebuild). -- Dave in Australia

They have the new controller (DC240) and new transponding devices and occupancy detectors (BXP88, BXPA1) in near future? Our club is getting ready to refresh the equipment and we would like to know if