开云体育

Graham: Oddly the DCC++ does a lot of you want to do if you use the Arduino Mega and enable it's I/O pins through the DCC++ software. Except for finding all the parts it's rather straight forward in

Hi Wouter, I think that perhaps we may have a cross posting here. My postings have been to do with trying to eliminate as many errors as possible from the Master xml file so that we can reduce the

Hi Karl As reported I now have audio when pressing the buttons in VSD Manager but on further testing I realise that I get nothing when running a loco identified in the Manager and saved to the

Hi Paul Thanks for the DCC++ link.? I took a look at it, but I'm thinking it may be a bit above my pay grade !? At this stage all I'm thinking about doing is using an Arduino to detect loco

Yes, sorry, this response has to do with my thread Decoder Pro Problems, please go to that thread!

Yes, sorry, this i a response to my original thread (Decoder Pro Problems)? Please go to that thread!

I have attempted to change the direction of travel on the loco (SW1200) on my Program Track.? Then, I placed the loco on my layout and nothing worked!? Used Digitrax SoundLoader to do a Factory

What method did you use to 'switch normal direction' on the decoder? Since that ends up modifying CV29, and that includes other important parts, use of the wrong value could change other things like

I wish... Most errors I hand craft make JMRI unresponsive with no log message anywhere. It is a very frustrating business when all you can do is insert print statements until you get to the line that

One of the big reasons I have down loaded JMRI Decoder Pro is Digitrax the company? was damaged by Hurricane Michael and my new Digitrax DCS 51 Zephyr Xtra needs to go back to the factory, because it

There's a bunch of "stuff" missing in your post. JMRI/DP will talk to the Z but needs an interface like the Digitrax PR3/4 or LocoBuffer... The programming booster is only that, a booster to deal with

I am attempting to program a Life Like Proto 2000 SW1200 switcher, I have just installed a Digitrax DH166D decoder (Non Sound).? With the Digitrax SoundLoader programmer I have the loco operating

One of the big reasons I have down loaded JMRI Decoder Pro is Digitrax the company? was damaged by Hurricane Michael and my new Digitrax DCS 51 Zephyr Xtra needs to go back to the factory, because it

The DCC++ interface is supported by JMRI, details here ( http://jmri.org/help/en/html/hardware/dccpp/index.shtml ). ?This was designed to be used in conjunction with an Arduino base station, and the

Hi Gary, Here's tutorial how to use the indicator of signal masts https://sites.google.com/site/sidloweb/jmri/09-panel-editor/navestidla. But it is unnecessarily complicated for your needs. If your

Dave That should be the only line that needs changing.? As far as signalling goes at the time I was mostly interested in just a list as I didn't have all that many signals.? However, finding which

John, I have read through the program listing for “Tables print.py” and as far as I can remember from my programming days, many, many years ago now, it would appear that the only line I need to

Good Morning John, Thanks for the update. Dave Sand has confirmed that with regard to both the Turnout and Block Tables, that any entry with just two connection showing is the default set when the

I have this working now. First off? I had completely forgotten the procedure to add a buffer mast. Once I did it as per the instructions - it still did not work. I found that if I added an anchor ,

I know how to print out a panel (multi pages) using a print screen method but I would like to see a feature in PanelPro that avoids that hassle. I would like to see a menu option that will print the