开云体育

I downgraded to JMRI 3.10.1, and the pull down menus for Circuit Builder in Panel Editor worked okay. They said that a detector circuit was not defined. When I created the first OBlock, the error

You need the actual decoder files (ie. The ones labelled “stainless zephyr” or “green engine number 4”, or whatever you called them) which sit in a subfolder. Copy those to the equivalent

I have a new computer with windows 10. I have JMRI/Decoder pro V4.13.7 installed in the new and old computers with Sprog V3. I exported the complete roster to a USB stick, moved the stick to the new

I'm assuming JMRI would be setup the same way but in the computer world a That's a very different notion of a terminal server than the support in JMRI uses. JMRI's notion of a terminal server is based

Paul D, Relating Layout Editor to a Schematic is a nice analogy. -Ken Cameron, Member JMRI Dev Team www.jmri.org www.fingerlakeslivesteamers.org www.cnymod.com www.syracusemodelrr.org

Hi Nathan, I also desire having the same sketch apply to all nodes of the same type and config updates via MQTT seems to be the way to go. Big tick from me. As you know,? there is still config to be

I have a similar arrangement with my layout in my garage some 30 metres from my Windows pc running JMRI 4.12 in the study, so I bought a Raspberyy Pi 3 (micro-computer)?for around $100 Aus which runs

I'm assuming JMRI would be setup the same way but in the computer world a terminal server works like this: <Server with whatever programs you want available>? -- CAT5/6 --?<Very basic

You might be able to do what you want by using a Raspberry Pi and the instructions at Steve Todd's site https://mstevetodd.com/rpi. I have just loaded a $35 RPi (+~$15 for power supply and case) with

Thanks Wayne - the JMRI wepage at?http://jmri.sourceforge.net/help/en/html/hardware/TerminalServer.shtml?says it can be done with a terminal server.? But I get confused what type of terminal server

I had this problem in Panel Editor. Thankfully as I was working my way through I was saving A NEW FILE every 10-15 minutes because there is no undo option. I was working away and went to open a menu

Gary, When you say 'through NCE program track relay device', I assume you are using the Auto SW device which tranfers control from your mainline to the program track. You have said nothing about

So you're basically looking for a wireless USB adapter correct? You want to connect your laptop to the NCE controller upstairs and leave the laptop downstairs? I'm in IT and have not heard of such a

I had the same problem.? I just thought it was a bad down load.? I had this problem with 4.13.4 and loaded 4.13.6 and all works.? I have a Lenz LZ 100 command station Version 3.6 with a 23151

Gary, Look at the JMRI preferences and you will see everything set to internal. Which means JMRI is only talking to it self. Change the settings to match your items and save and restart. David Klemm

Thanks for replying Paul Davidson but I apologize for not making my problem description more clear.? I do not possess a second computer nor do I want to acquire a second computer to dedicate to model

JMRI software is free. No reason you can't download a copy to your second computer. However, to share the same files would? probably require you to have both computers on a common network with

The best place i to report this is to create an issue at https://github.com/JMRI/JMRI/issues Less chance of being lost in the forum. You would need to create a github account is I remember correctly.

Paul - Thank you! That makes it make SO much more sense. Is it better to learn one and then move to the other? I've seen it mentioned that their both pretty interchangeable, wasn't sure if learning

How do I configure a system where I have the JMRI software on a wireless laptop on the first floor of my home with the NCE controlled model RR layout on the second floor of my home?? My wireless