开云体育

The turnout error can change the referenced turnout but is something like this (my DCC++ turnouts are DT67 through DT98 and I have seen messages on DT67, DT68, DT71 randomly): "Unexpected error

The sensor error I sometimes get is: "Could not create sensor System name "ISCLOCKRUNNING" in adaptor of type jmri.jmrix.internal.configurexml/ErrorHandler.shtml"

All, I am running Raspberry Pi with Raspbian Stretch 9 Java 1.8.0_65 Panel Pro 4.12+Rb6a9bb1 DCC++ though Arduino Mega 2650 with Pololu motor shield I have setup my command stations properly and with

Moreno, Please try build 2642 or later. The first issue above was caused by not interpreting the LocoNet response correctly. Strangely, this only impacted the single CV programmer and I had been

Folks I want to thank you all for your help. Issue solved. By using the system console it became apparent to me that all the issues had to do with one of the AIU's. When I looked at the sensor table

Sounds feasible and sensible.? Do backups, and name them so you can easily recover in case you don't like the results. Dan

Hi Gary, I think that will work.?? I would do a backup before replacing the car file in case it doesn't work.? Let us know if you run into any issues. Dan

Found it. Thanks! Allen

I have downloaded the new image and loaded it on my Pi-Sprog One and it works flawlessly!!! Thanks, Steve for your excellent support and persistent work on this issue. Bob Johnson Allen, TX Sent:

Hi, I’ve back up my files with current file locations but have been modifying many of the files and want to keep them all except for reinstalling the actual car location that was in the back-up. To

Hello Geoff and thank you Bob. I also use the serial port in scripts. Is it possible that you can publish your fix? I offen suffer the same problem but my programming skill is not quite as good s I

Hello John, Just wanted to mention that I have done what you are after. I too use Arduino (Pro Minis) as Accy Decoders, the Geoff Bunza implementation from MRH ( SMA-20 (

I have not been following this thread very closely but since my name was mentioned (no problem there) and since I am a big fan of layout control automation, let me at least chime in with a quick view

Doc, John needs his cars to move with a purpose, so that all cars on the barge have industry destinations.? The only way to do this is to use staging to generate final destinations for all of the

John Staging tracks require all cars on the track leave as a single train so don't use staging tracks for storage, try yard tracks instead. I think you are making it too hard on yourself.? You build

Jerry, Look at jmri_bindings.py. The first part has the shortcuts for the common managers. The second part has common constants. The Java documentation is at http://jmri.org/JavaDoc/doc/

There have been a number of posts about understanding script examples recently. I’m trying to work my way through some in order to modify and expand, but need some basic information. I’m sure this

Some further testing: I deleted the profile of and reprofiled one of the locomotives as the previous profile apparently had anomalies. This has rectified the sudden deceleration issue, but not the

Dan Thanks for this help. Based on what you are telling me I should be able to alternate between configurations ie run one configuration for several sessions and then change to the other

Martin, thank you for your reply: that is most interesting. That Railroad Museum certainly looks impressive. Do I understand that you did manage to get JMRI set up with the Dispatcher and/or