开云体育

David, Sure. A slip always has 2 turnouts assigned and setting them appropriately will create a path. To help visualize what happens, do the following: Create two internal turnouts, TA and TB. Use New

Is it possible to create a route through a slip, without breaking it into separate turnouts?

I have a raft of Atlas RS-3. All are Loksound Select. What hardware are you using? Thomas DeSoto, TX

I’m currently connecting the Arduinos as C/MRI SMINI nodes which doesn’t suit my new purposes at all, allowing only sensor and turnout input (that is, zero or one) to JMRI. ?I need an interface

Robert, I came in, in the middle of this conversation so forgive me. I am assuming that the decoder you are talking about is a Tsunami2. Starting the engine at power up or by function is controlled by

Steve - thanks for the response. So what I am observing is an ED behavior. Hopefully Robin will see this thread and respond. Mark

Thanks, Dave. I'll see what I can do with it. I haven't touched Python since I retired five years ago, but I'm sure it will come back. If not, I can ask my son. If I get one working, I guess I'll just

Don, Here is the link to the script: /g/jmriusers/files/ProblemsBeingWorkedOn/dsand/tf4_turnouts.py You may need to adapt it based on how the function key process actually works. If

Dave, Please do the upload. It will save me alot of time as a start point. I've only got 15 points to change on this small layout. I count crossovers as one point, even though they throw two turnouts.

Dave, I appreciate the follow up. I started out to do this with Geoff Bunza's 17 function decoder, but had the TF-4's sitting around. If I'm going to script it, I may just see if I can write a routine

Don, Based on my understanding of your setup, for the fun of it I have created a script that will send function key commands based on internal turnout changes. If you would like it, I can upload it to

There is no inherent reason why you were unable to set a long address in a LokSound Select decoder, unless you were trying to do it in Program on Main. Changing long address in Program on Main is

Thanks Rick, found f45, like the engine sound, but it seems to not start at power on, only when engine starts up, changed back and forth with read, write, but does not action, changes cv116, and when

Hi all Yep, did it by the book for those 8 mainline locations and it's worked well for ops sessions over about 7 years However, We've learned that switching my steel mill and related yard is too far

Gary, The LokSound Select is a very versatile decoder. It should take 4 digit addresses just fine and the speed curve setting functions perfectly for me. Did you have decoder pro auto identify the

I Unable to select command station consist in the consist manager. The selection button is greyed out. I am running JMRI 4.12 on a raspberry pi. My commanf station isa digitrax DCS 240. All of my

Brad, I had a semi-same experience. I finally had to delete my Com3 port. Have you retained all of your "God given" er...MS ports? Bob

Bob, I can't tell you how to do it from a Digitrax throttle. I'm not a Digitrax guy and don't wnat to start a war by explaining why. From any other system, I set the address for the decoder and press

Bob, The TF-4 is a mobile decoder with transponding and 4 functions. The 4 function keys can be set to a group of 4 in the F0-F12 range. The four outputs which normally drive LEDs drive a relay which

Thank You Michael,? Rick.