开云体育

See the Screenshots in Photo Album Gary233 /g/jmriusers/album?id=64825 </g/jmriusers/album?id=64825> -- Dave in Australia The New England Convention 2018

I encountered the same issue, I took my AV offline and attempted to reinstall.? I still cannot get past the abort, retry or ignore popup.? I am running Windows 10 home and have the latest Java

As others have explained you must turn of Verbal Acknowledgement (on the QSI Misc. pane) in order to program a QSI decoder with JMRI. The Verbal Acknowledgement causes the decoder to go deaf while

The individual Sound Slot Volumes are further down the Sound Pane. You need to scroll down on this pane. The Sound Slots are (usually) activated in the Function Map by being selected in the Sound Slot

Dear JMRI Users, I just joined the group and this is my first post. To all you WiThrottle-JMRI-Mac "gurus," I recently converted my N Scale layout from DC to DCC. I installed a Digitrax DSC240 Advance

Is there a straightforward way to send a specific speed step (i.e. 0-28 or 0-126) instead of a throttle value 0.0 to 1.0 to a throttle? I can't seem to find a place in the code where it will let me do

Ken, The OEM QSI decoders can be "programmed" with JMRI but to do anything with changing the sounds, you need a QSI programmer . If you have a version 7, the chip has been upgraded to accommodate

You need to shutoff verbal acknowledgement. -- Peter Ulvestad JMRI Users Group Moderator - http://www.jmri.org ( http://www.jmri.org ) Tam Valley Group Moderator - http://tamvalleydepot.com/ (

I recently bought an Atlas Trainmaster with a QSI decoder, Series 7.? I was able to reprogram the address and NMRA digital setting using DP 4.10.? However, when I tried to change sounds, volume or

Preferences > connections > defaults needs to be Loconet and not internal Tom Wilson

Bob, Thanks so much for your reply. Thanks also for all your excellent work and leadership on JMRI. It's obviously being used and much appreciated by so many!!

Bob, Did you verify that the "Preferences >> Defaults" entries are set to tLocoNet? Dave Sand

In Python, “None” is the “thing reference doesn’t point to anything” value that Java calls “null”. Bob -- Bob Jacobsen rgj1927@...

OK, installed 4.12 and same problem. I have verified everything I can thing of. I ran the LocoBuffer-USB test noted on their website and it checks out. Could it be JAVA related? I have version 8. What

Hi Wouter, Thanks for that answer.??*if s :* Unfortunately it did not work. I eventually found that: *if s is None : * did work correctly. Have fun!? :-) Best regards, Geoff

OK 4.12 installed. Roster still there :) I read entire CV Sheet and made sure all CV’s were read. When I go to the “Function Map” tab some functions are indicated, others say things like AUX-1

A simple *if s* should do the trick. Wouter

One thing: the upgrade alone is not enough. Whether before or after upgrading, you will still need to go to the preferences and correctly set everything up. After that, 4.12 will leave things be,

Hi, I have been working with sensor scripts of late and am in need of testing whether a sensor with a given user name exists. I understand from the doc that for:??*s = sensors.getByUserName( uname

OK, ,glad to hear it's a known issue. Will do the upgrade and report back. Thanks. Bob