开云体育

Bob, I just tried the update and it appears to be working OK in general. I did have one small problem. It did not recognize my decoder. The decoder is a DN146A and is installed in a Atlas U25B.

I just installed V0.9.3.5 and everything seemed to go fine. I didn't do any programming or other testing but everything opened as it should. I will reserve comment about the current version

If its pretty straight forward and you have a build directory then I can try it on one of our development Linux boxes at work. Maybe tar-gzip it up and email it to me and I'll have a go. If not then

I've uploaded a new test 0.9.3.5 version of the Windows installer version. I hope that this is starting to converge ... This is meant to test a new GUI for selecting the decoder model. This one

Would it be OK if I made a German homepage using your text? I think that would be cool! Bob -- -------------- Bob Jacobsen (Bob_Jacobsen@..., 510-486-7355, fax 510-495-2957) Am working off a

Would it be OK if I put this on the web so we'd have a German version of the homepage? That would be cool! Bob -- -------------- Bob Jacobsen (Bob_Jacobsen@..., 510-486-7355, fax

Yes, that's what the active Slot Manager does. But that's a lot of LocoNet traffic, and it can cause problems if you start the program while the layout is running. I have to teach it to be a little

The installer _is_ a 32 bit program. I don't know much about Windows, so left most of the installer-builder settings as they were. It's got an option called "Generate a 32-bit setup" which is

My laptop is an IBM Thinkpad T20 with an Intel Pentium III processor running about 800mHz - don't know exactly. The error happens immediately that the Command Line window opens after selecting the

Bob, Is it possible that when Decoder Pro initializes for the software to read the slots in the command station and store that information. If this could be accomplished then the slot information

Hi Bob Just a note to say thanks for all the time you are spending Decoder-Pro Jerry Walker aka n1hat --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system

That's not a good sign... Does this happen _before_ the installer splash screen comes up? And what type of laptop (e.g. what processor) is this? I'll ask the Mindvision people if they've seen this

Bob, I downloaded the installer and it ran clean on my W95 machine. The new version appears to work OK. Unfortunately it is not near teh railroad and I have no loco net connection to it to try

Thanks, I think I understand. The answer is "yes and no". The LocoNet message we're displaying doesn't carry the locomotive address, just the slot number. But the program does have a SlotManager,

Jon, I do not know how to express this very well so please try and follow my reasoning. Each time a locomotive speed message is sent from the throttle to the locomotive the packet includes the

the LocoNet Monitor screen< Al, Not sure this would be possible until we have a feedback scheme in place, like the current Digitrax or what NMRA is looking at? Or do I misunderstand this? Jon

Bob, I just tried the lastest version Decoder Pro (0.9.3.4) with Java package (1.4.0_01) real quickly on a Dell GX1, PIII 600 mhz, 256MB ram, Com1, and Windows 98SE. This is a very quick test. 1)

Sorry to have been so out of touch; I've been working on the PC <-> MS100 connections. To make a long story short, I've uploaded a test installer to:

Dear bob, with your install program I?ve installed the Decoder Pro part of the J/MRI project. The JAVA version is 1.4.0_01. Conected via(non selected) On port (non selectet). Begining the

Aleksandar, http://www.der-moba.de dieter