开云体育

Update. The block removal process was successful when using the correct techniques. John Bauchiero - NCE PH-Pro & PowerCab, Pi4, DCC-EX - JMRI 5.11.4 - Java 17.0.12

Yes sorry for the semantic confusion on the file name - it is the layout panel file - NOT configuration settings aka profile. The behavior is exactly as you described - it prompted me to save and I

Steve, This one is easy. If ANY turnout is thrown, the SML route is diverging. See https://www.jmri.org/xml/signals/basic/index.shtml for details about the "Basic" signal system. Dave Sand

Paul, The "compare" process does a temporary store and compares that to the last loaded xml data file. If there are differences, then there have been changes since the last store. The default

I created/uploaded a small test case to show the issue I'm having with my layout. /g/jmriusers/files/ProblemsBeingWorkedOn/sml_test_5_multiple_turnouts.xml I may be confused but I'd

Paul, Do you, or perhaps anyone else on this list, know what causes this?? Can you find anything on the log/messages.log file that precedes the discovery that might provide a clue as to whether this

Ken, I found that out too, that blank can not be selected but the characters need to be deleted instead. Then Done. Dave, Where I went wrong was in trying to do the List and the Table deletions all

On the block list, I found that you cannot just select the blank on that list. You need to clear the field by deleting the characters, then click "done". -- Ken NYNH&H, Old Colony Division, Cape Cod

John, The block list is shown in the track edit dialog. I did some more testing. All you need to do remove the block name from the field and click on Done. Dave Sand

Dave S, Yes, I have disabled the auto block when I realized the mess it made. I guess I don’t understand the difference between the block list and the block table but I’ll look it over and give

Tony, You are starting DecoderPro instead of PanelPro. You are seeing the Roster list and DecoderPro does not have a splash screen when it finishes the startup process. After you get started, go to

John, I assume you have disabled auto block. Edit each piece of track. Scroll the block list to the top and click on the blank entry. The old entry will be highlighted. Delete it. Click on

Ps: i get error message saying it cant create a throttle? whats wrong? i cant find a way to save the positions and sizes of the windows so it open the same way after shutdown tony

i am using a dell latest window laptop using latest no test version i open a profile in the past and all the windows I ask to open does open with a window openning last with the program name and

My original project was to combine two LE Panels, the Main railroad panel and the 5 track passenger station panel. Knowing there isn’t a quick way to join them, I proceeded to redraw the 5 track

That's right, I had forgotten about the Light it. Simple enough, it runs off the track bus. -Ken Cameron, Member JMRI Dev Team www.jmri.org <http://www.jmri.org/>

Hopefully this can help others who experience the same problem. This has happened 3 or 4 times in the last 5 years - so not often. When opening JMRI, you get the dreaded unexpected EOF error loading

Steve, Direction sensors are required for signal heads/SSL. Direction sensors are optional for signal masts and SML. From my point of view, they are generally used to implement APB (absolute

Dave, Some additional information... I know you advised making each block a separate section. I originally did that but couldn't understand how to create the direction sensors so I deleted and went

Here's the link /g/jmriusers/files/ProblemsBeingWorkedOn/GGNN.xml I wouldn't be able to make it without this group.