开云体育

About the position detection/calculation in JMRI: Does it JMRI can calculate the position of each vehicle of a train?? Like, for example, telling that a train begin at cm X and end at cm Y, with

I have difficulties to understand what a "sound-follows-loco in VSD" is. (Sorry, english is not my main language). Does the "LayoutEditor-Train Simulator Proof of Concept" is only a simulation of

From what I understanding: With warrants, JMRI can calculate the position of the train after it entering into a block and using the train speed and block length. But the position calculated only

I have considered the radar distance detector But it have some disadvantage: It need to be installed in the axis of a straight track and have no obstacle. If the track is the main one of the

A warrant is a fixed point on the map that tell which train pass by it?? "Nags via groups.io" <snowy999@...> writes:

Jos, In your original post you indicate that you want to get a throttle setting for an auto active train in Dispatcher. When developing program logic, the first question is "Select a throttle based

Ken, There are many possible issues. Please upload your layout xml data file to the group's ProblemsBeingWorkedOn file folder. Dave Sand

Dave, Thanks, it seems that I should learn more about Jython, I'd appreciate an example of this. Where can I find documentation about formulas that can query the JMRI system from within LogixNG, like

Hi I have just started to convert my ssl signals to sml and I have the signals operating at one of the switches. When I run a train on the mainline the switches activate on the siding and when I

Daniel, It could be done using LogixNG except for one problem. The "InstanceManager" function normally returns a manager object, for example using a formula such as: where "mgr" is a local

Jos, No, not currently. But you can use a Jython script to do that. Hopefully someone else will join in and give you an example on a Jython script for it. Daniel

Is there a way that I can query an active throttle with LogixNG and, for instance, store the current speed in a local variable with LogixNG? I want to get the current train speed with LogixNG when

To get a build report for a train that has failed to build, just press the "Report" button for that train.

I would never pay the $700 asking price. Like I said, Bob gave it to me for free. Talk to bob@... I think the board is worth about $100.

Hi both - thanks for this. I upgraded yesterday and shortly afterwards encountered a new error! Well, at least that's progress! Here's an excerpt from the JMRI logs - I'll upload them in their

Hi, Perhaps I should have elaborated on how I have things set up: Jmri 5.6 Java 11.0.18 Windows 11 DCC Command station Merg via CBus Sensors Merg via CBus Turnouts via DCC I have set up multiple

Thanks for the responses, confirmed my thoughts, just wanted to double check. Darren

Trevor, do you know if the jayton script can be translated into LogixNG? I much prefer that than using scripts. Thx Leo P <directorsixfive@...> wrote:

This is a normal situation. Once one train allocates the crossing it will set the switch's. The other train will not be able to allocate the crossing until the first train has cleared and released it.

Gord, You've attached the same build report from your previous post.? No build failure.? However, the date the train was built is back in June.? You're not retrieving the latest build report for