开云体育

Layout location has no internet connection. Can JMRI be upgraded with the executables off line? Thank you Allan Stony Plain Museum

I'm not sure where any of the code is as far as getting to production. That's why I'm asking for an example, so I can test. And thanks go to Brett Hoffman for the JMRI changes.

Just a note from a guy who took a 28 block DC layout to a 48 block DCC? layout by isolating the turnouts.? For single turnouts, place a signal at least 40 scale feet from the points end of the

I’ll look at this tonight. Do I need an updated WiThrottle? Oh, and THANKS Phil G

John, A2 is toggling the state of the NX. Since it is active based on the if, the new state will be inactive. The Return statements are not needed, return is automatic. Dave Sand

Good morning Bob, Any news? I know that to perform this Nuclear Reset (AKA USER PRESET 1 RESET) CV201, CV202, CV203, and CV204 must be written in order with the appropriate values. Would you expect

All, Changes have been made in JMRI WiThrottle Server, WiThrottle and EngineDriver to (hopefully) handle the higher functions (or at least quietly ignore them). Can anyone share a Roster Entry or two

Thank you for the solution to my issue described above. OK I have updated to version 5.3.5 and the issue has gone away. Now I want to set a pair active using the following logixNG I have: ! A? If

I am running version 5.2 Production Release. So you say I need to use a a "Test" Release? That seems strange but I will try it.

Steve, Jerry's sketch works, but he made custom changes to the MFRC522.cpp. I haven't looked into his changes in-depth, but they should also work on the 8266. I will let him elaborate. The good news

Jerry Thanks for your reply, I will have another go as per my last post. However, I was very interested in your use of an ESP32 and WiFi. Tom and I have been trying WiFi with a WeMos D1 R2, but

Tom, Jerry I am pretty sure I have selected the MERG Concentrator input, but I wilk make doubly sure! The message I'm getting in the RFID Command Monitor is consistent with it being unselected. When

John, What version of JMRI are you running? You need to be running at least test version 5.3.2. Dave Sand

I don't know if this is a bug or if I am doing something wrong.? I have a logixNG that uses an NX Entry/Exit pair in some of the logixNG for example: I have: ! A? If Then Else, Always execute ? if

Steve, I tend to agree with Jerry here. We solved this situation for him with this. Ensure that the connection type is MERG Concentrator (A-H), whether the connection is serial or network

Mel, You may, of course, employ whichever tools this program makes available (there are many).? If you want to avoid schedules for now, you would still have some options to prevent the

Yes Pete thank you for your advice I did make some of the changes you suggested and it also helped with a few other minor problems I was seeing. So again thank you and Yes I will keep using the

Hey Trackwalker, I am glad you were able to get the Build Report Detail Level turned up enough so that help could be offered.? I think it was from the lower level of detail that I was missing the

Stephen - I have been trying this too (although with ESP32 over wifi), and when I got “unknown reply of length 16” it was because I did not have MERG concentrator selected in the RFID preferences

We would like to point out that this list is for discussions related to JMRI, and is intended to be a place that people, particularly beginners, can turn to for help with their JMRI problems from more