开云体育

Thanks for your quick reply, Conrad! I'd like to add a remark. If a sound is very loud, maybe the master volume cannot correct it. I think the best way in this case is to edit the file with an Audio

Dave, Finally got around to it: ?I put the dwarf position light signal appearance file in my user files, and it works great! ?Thanks for making the mod for me. Rummy

Klaus, Forget sound volume questions.? I found your posts of Apr 2017. Conrad

Dave, I have created a script which can be used to implement linked turnouts for slip pairs. /g/jmriusers/files/Script%20examples//LinkedTurnouts.py Since it is triggered by changes

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the [email protected] group. *File:* LinkedTurnouts.py *Uploaded By:* Dave Sand

Klaus, I just opened your config file and saw the D1k.wav.? So, on my file, I switched to D1k and no clicks. Nice. My error was in just looking at your sound files and using D1. On another subject,

Brian, The videos are in the members section of the NMRA web site. I don’t know if you can access them from YouTube. Mike Swederska

Dan, your link shows exactly what I was looking for. Went there on my program changed everything I wanted. Thanks so much for your help. I am going to work with the program as I run trains but will be

Nom, I'd suggest using 4.17.3 (4.16 has baud rate issues for some systems) as there are updates in the LCC/OpenLCB library since 4.14. -ken cameron

Mike, Is this video available on line? if so do you have the link. Thanks Brian

Hi All, I have tried to use the Fast Clock using Time Broadcast Protocol in Ver 4.14+Rd06e0b but I do not see any activity in the OpenLCB Monitor. Do I need to do something other than start/stop the

What about using automation to automatically build trains and print out the necessary paperwork? One thing I’ve been experimenting with of late is starting with just four trains built and, as the op

Thomas, Thanks for the log, it shows that the commands from EngineDriver are being sent exactly as I'd expect. I see the on and off commands for each of the functions you describe. Next thing to try

Hi Mike, Here's the link the the help page: http://jmri.org/help/en/package/jmri/jmrit/operations/Operations.shtml And here's where you setup the font and colors for your Manifests:

I just finished watching the NMRA video number 1 from the clinic of this years convention on JMRI operations. The video was so good that I felt I could handle setting up and using the Operations

Steve, Throttle on JMRI works fine. bell, horn and Mute all work fine. Engine driver, same address, not so much. and ED sees the throttle speed changes fromthe JMRI throttle. I set to copy log to

Thanks for looking Chuck. I’d love to move on from Lenz to DCC++ but I’m over invested in Lenz feedback sensors. Looks like I’m staying out for now!

Bart, If the script is setting the ACTIVE/INACTIVE, then that's the state you get. At least from what I recall, that scripts are setting the state. It sounds like your script needs to set ACTIVE when

I think that what Gary is asking for is experience with Operations Pro for deciding how to choose between real time mode and batch mode (or a hybrid).? What has worked on several railroads that I

The invert box comes from things like XpressNet, LocoNet, etc where it’s working to invert the traffic between the JMRI Sensor object and whatever is on the actual wire. It sounds like you have a