开云体育

I presume this means there is a fix pending for an upcoming release? Lyle D

Jim, That's fine in principle, but pensioners are a neglected demographic in the technology world. We don't have unlimited and increasing disposable income and have to make choices that often result

Jim, These sound like iPad 2s. My iPad 2 is stuck at 9.3.5 and my wife's iPad 1 is stuck at 5.1.1. Dave in Australia

I am hoping I can implement jmri - serial - to an arduino mega with sensor shield - -to a 16 channel relay board. JMRI turnout status from the table will drive a relay channel. An ac source will be

I have the same identical problem with my android tablet on Chrome. In addition, when some of the tables do show, they are off by at least one row when selecting a function. I reported this some

Correct. The iPad 1 is so far out of date it is almost useless. Gave mine away over 2 years ago. Basically when any device, computer, tablet, or phone will not update to the latest operating system it

The problem is likely lack of support for WebSocket in that browser. You can test at https://www.websocket.org/echo.html. If you can't update or use an updated browser, there is workaround. Enable and

Jim, I know the iPad 1 is no longer being supported by WiThrottle so they wont work. Roger

Hi Jerry, How very nice to read an update that is a success story! Due to the nature of groups like this, the focus is always on problems -things that go wrong. Much gets solved, and the occasional

I would assume the iPad 1’s are no longer getting software updates due to hardware reasons. Just like the first iPods are not. David Klemm Sent from my iPhone Xs Max ________________________________

The iPad 3 is IOS 12.3.1. The iPad 1s are both 9.3.5. Both of the 1s say the software is up to date. Does it not accept later versions? Not sure how to tell if Safari is up to date, as I thought that

What are the iOS versions of the various iPads? Is Safari up to date? If the iPad 1 is stuck at an older version, see if you can download and try Chrome via the App Store. Bob -- Bob Jacobsen

I have successfully displayed my panels on an iPad 3 and my iPhone 6 using Safari connected to the JMRI Web Server. I was on a roll and bought two used iPad 1 tablets. I can connect to the JMRI Web

A couple of questions about Layout Editor in PanelPro. ? I successfully created an operational Panel and I am super happy with the results. 1. ?I added the Fast Clock to my Panel. ?However it is

Thought I would post an update (a year later) on the approach I took to implementing BOD and turnout control. My original question was about which of several systems to use to get started:

I've not been persuaded by dead rail no-wiring arguments in scales as small as HO.? Apart from the battery physical space and replacement issues for prime movers, I haven't seen an economic argument

Fixed in Github. Michael Mosher Member SFRH&MS http://www.atsfrr.net/ DCC Master PVSMR http://www.patcongvalley.com/

John P, You would basically using a zero resistor on the wheel sets. If I was doing something like that, I'd likely go the route of normal detection (usually a 10k resistor) and put a DCC signal on

Ken Thank you again, all you do appreciated. I was being slightly provocative. My ambition is to build a dead rail system with RC control of DCC locos, then I could divide the tracks up into blocks

John P, You are correct. Real world signal systems tend to have someone around in charge. So things like a reverse move would be known and effectively the system is told that's what is going on.