开云体育

A BDL16 (or the current version BDL162) can work independently of a Digitrax command station. So it should be possible to hook up a no-command-station-LocoNet for Surroundtraxx. It's programmed

Wow. That's incredibly inconvenient, as according to Mike Mosher the DH121 also has 34 in CV7. Bob -- -------------- Bob Jacobsen (Bob_Jacobsen@..., 510-486-7355, fax 510-495-2957)

Forgot to add, CV7=34, on the DH163D. Jon Miller AT&SF For me time has stopped in 1941 Digitrax DCC owner, Chief system NMRA Life member #2623 Member SFRH&MS

While doing tests for a fellow on the Digitrax list I hooked up my DH163D. It identified as a "basic STD" decoder. I would have thought it would have identified as a DH163P as it is a FX3

Bob B You beat me to it. This may need it's own file, as it does funny things when resetting certain CV's. I have read this decoder's CV's using the DH140 definition, but have not explored it past

Thanks, Bob. I'm considering adding Digitrax transponding to my EasyDCC system so am paying attention to discussions about Digitrax transponding. Digitrax evidently designed their transponding hw

Thanks. That's the beauty of OO programs, you can reuse even the wrong things easily! I've fixed it. Thanks. I was hoping to keep it in a separate group, as it does seem to have different behavior

My BDL16's & PM4's are installed in an inconvenient place under the layout, so being able to configure them without having to crawl under and push buttons seemed like a good idea. (Another) Bob

Thanks, Bob. That answers my question about why one would want to program a BDL16.

Mike, I read your message earlier but when I went to respond, Bill had decided to remove it from my Hotmail inbox. Because of this I find it necessary to respond here. Hope that's okay with you and

Bob, No apology required. Like you, we all have many priorities in our life. Sometimes those that rank highest aren't always the ones we'd like to take on first. Found a slight problem on the

First, my apologies for being so hard to reach recently. I've been pretty busy, and in the time I've got available for this project I've been focused on getting ops-mode programming done. While

Thanks Jon & Robin for the explanation of PR-1. Jim Hanna

Hi Jim. The PR1 is a Digitrax product that allows you to connect a PC directly to a programming track. Basically what happens is PC software generates the DCC waveform and the PR1 boosts it to the

Digitrax sells the PR-1 which is a hardware device that connects to a computer. Others write software which will program an engine on a separate, stand alone, track. Good idea that works

Forgive me, but what is PR-1? Jim Hanna El Cajon, CA

No. Jon Miller AT&SF For me time has stopped in 1941 Digitrax DCC owner, Chief system NMRA Life member #2623 Member SFRH&MS

I know this question has prolly been answered before but I can't seem to find it in the archives. Will Decoder Pro work with PR-1 yet and if so are there instructions on how to set it

Claudio: Go to http://jmri.sourceforge.net/DecoderPro and click on "new manual" and it will answer all your questions. Good Luck, Jim Hanna El Cajon, CA

Hi all: I am new user of JMRI. Have a NCE System, lot of Digitrax decoders, some Lenz and few Zimo. 1) Some body tell me step by step how to use the software with NCE system? Need use it on "Use