开云体育

Bob, I think I suggested a similar approach that was simpler. The dropdown decoder list just shows manufacturers, but then there are flyout menus for each manufacturer that list the models. If

I don't have any real ideas about how to better identify decoders. I agree it's a mess, and will be happy to implement whatever you guys think is best. Mark Gurries made a suggestion a while back

Because with some manufactures CV7 isn't going to always tell much maybe the DN14(x) concept would be good. The tabs (panes) for that group could then be asterisked with the comment, "not all of

Ok, so how should the decoder name appear in the list when multiple decoders have the same CV07 value? My suggestion is that if the models have the same features, i.e. DN140, DN144, DN145, DN146,

Thanks Jon!

Jon, You are correct, I missed the DN140 in the decoder list. This was certainly operator error on my part, but that aside the sort order of the decoder list is another thing I've been meaning to

Bob, Jim Hanna found that IDENT didn't work for NCE decoder. Checking into this, I found that the NCE name is used differently in the decoderIndex and the decoder files. In decoderIndex.xml, it is

This just was posted on the Digitrax list, useful information! Out of production Digitrax decoders are listed at http://www.litchfieldstation.com/E/DccD/LD/OutOfProductionDecoders.PDF Jon

Robin, In my version I have a DN140 and a couple of DN142's. Looks like a little housecleaning is in order<G>. Jon Miller AT&SF For me time has stopped in 1941 Digitrax DCC owner, Chief

Michael, Thanks. I don't see a DN140 in the DecoderPro set at this point. For reference, can you point me to where on the Digitrax site this is all spelled out? Robin

The DN-146A program wise is the same as a DN-140. The DN-142 has transponding and back emf that the 146 and 140 do not have. Program wise the DN-144K, 145K,146A,147A & 148K are like a DN-140. While

Did a DecoderPro install today for a friend, and he immediately ran into confusion on Digitrax and Lenz decoder models. He had a factory installed Digitrax DN146 decoder and a factory installed Lenz

Bob, Thanks for all your work. I'm sure you'll come up with something for the index files. I tried out the roster tools this morning and they looked good. Jim will try to keep an eye out for a

That's a good idea. I played with it some last week, but wasn't able to make it really reliable. I'll keep working on it. (The problem is that the index can be in two places: The xml/ directory,

Each CV has a default value specified for it by the writer of the decoder specification. Some default to zero while other CVs have defaults configured to be the same as the defaults the factory

Bob, When using an EB (I have a DCS100 not a BD150) you would have the problem of not knowing the initial decoder settings, so does DecoderPro set all the CV's to a particular value (0 ?) when you

Sorry for the slow reply. Perhaps you've got it working, at least for write operations now? If not, there are a couple things you can check to help track down the trouble. First, see if basic

Sorry for the slow reply. The Empire Builder doesn't have the ability to read from decoders. There's nothing a PC can do about that, unfortunately. DecoderPro should still be able to program them,

I've added a "Roster" menu to DecoderPro that let's you copy, delete, export and import locomotive configurations. The first draft of a web page describing this is at

Group, Another plus for our beloved DecoderPro. I bought a group of CVP AD4 accessory decoders for switch motors. Not wanting to do these by throttle I first used PR1DOS connected through the