开云体育

I have a DB150 hooked up to my computer via a LocoBuffer. Before I found out that the DB150 can't read CVs I thought it wasn't working, however I am able to write CVs. Sure is much easier than

Group, I think Bob did some experiments with a DB150 (EB) and found that he could write but as we know the EB has no programming track so no read back capability. This is a type of system problem

Bob, Digitrax is soon releasing the lower cost DCS050 and this unit has a programming track. I am going to get one when they come out, probably June or July. Depending on their specs. (it's not

Mike, The EB (DB150) does not provide readback of CVs and does not support a separate programming track. I think that currently DecoderPro supports Digitrax via the programming track of the Chief

I didn't mention that I have an Empire Builder II. After reading Robin Beckers reply to the last message, I wonder if I'm screwed at this point? This simple project is getting out of hand. (G) I

Bob, As you guessed, R/W is required at this time. That means the EB is not supported. Robin Becker Tucson, AZ http://home.earthlink.net/~n3ix/drgw.html

Hello: I have just completed the assembly of John Jabours LocoBuffer Kit and it tested out okay. I built a 9 pin to 25 pin cable. Intalled a Keyspan PDA Adaptor between a USB port and the

Read about, then D/Led the latest veriosn of DecoderPro. Got to admit, I like the selection system and screen layouts. Problem is I can't get it to communicate with either my Digitrax EBII or to a

Thanks for all the good ideas. I suspect that getting the roster-management features working is going to take a couple of go-rounds, so I should probably get started on that first. So the next

I'd like to see manufacturers providing comprehensive info on their decoders. Even if we still have to make up the files, having good info would really help. For example, Debbie Ames of Lenz has been

That's part of it. It turns out that's a little more complicated than throwing turnouts, as there are _lots_ of different ways that information comes into the system. So the basic code has to be

Bob, Looks like when you create a roster entry and save it the filename is not display on the Roster Entry screen. Might lead a new user to conclude that the file had not been created/saved. In

Bob, Provided some telephone help to a friend that was trying to update to the latest version today. Had trouble getting the decoder list to come out right. Eventually had him delete the decoder

I'm a complete newbie at this, just having received my my DCC system, programmed 4 decoders, and having not yet actually used DecoderPro (just started it up to play with it). However, I consider that

Hi Bob, thanks for answer. distracted by a bunch of other uses. The program now has some limited capabilities to do that; it can throw and track turnouts, animate a little track plan as things

That's what I originally set out to do last summer, before getting distracted by a bunch of other uses. The program now has some limited capabilities to do that; it can throw and track turnouts,

Hello Bob, I am new one with only two question-suggestion for start: -What about layout feedback, -What practically mean your plan "Lenz XpressNet support to JMRI"? Best regards, Aleksandar

Bob How about stationary decoders? DS54 for instance. Nice little GUI to handle it all. Any ideas? cheers bob

Having a "Update Now" button would work, too. For those who want to schedule updates it probably makes sense to use something like Mac OS X uses: ---------- -Dave

Well, since you asked... Jon is referring to a "to do" list that I keep for JMRI/DecoderPro. It's in a little database, so not easy to really show well in an email, but I've dumped it below. In