开云体育

Here is an online clinic I did for NMRAx a while back, positioned to the Conductor topic: https://youtu.be/krhyvrhrxv4?t=1570 --SteveT

The "LokPilot 5 Basic" is a different decoder to a "LokPilot 5". Startup delay is a feature in a "LokPilot 5" and not a feature in a "LokPilot 5 Basic". So, if you have a "LokPilot 5 Basic" fitted to

Hello Mike. I set up? a logix for it. I also added 2 virtual turnouts which are used on the layout editor. While straight ahead is straightforward, it is the sides that cause problems. Before you can

I think the problem is that two turnouts have four possible states, but only three of them are mechancially safe. Referring to the image in the link above, the 3-way must not be set to “left-most

I just looked at https://peco-uk.com/products/3-way-turnout-medium-radius?srsltid=AfmBOoo3Eu51jXX7-NP-uQhE66SNzaUT6SBBrGaK0MC_A-pVBYBHoWmH&variant=7435765481506 Looks to me like two regular points

SteveT: Newbie Learning, I'm interested in your conductor video. -- Ken NYNH&H, Old Colony Division, Cape Cod Branch (1949-1959) Loconet * JMRI 5.11.5 * OSX,Win10,Ubuntu Blog: Cape Cod Railroad (HO)

The two points are controlled by two control devices. You essentially have two turnouts. Control them like two turnouts. You could create a selector using Logix or LogixNG and select with panel

Dave, at the time I was using lightits my ABS logix was pretty simple. If next block occupied or switch thrown, signal red if next block clear and next block occupied, signal approach If next 2 blocks

For my ops sessions I print the entire session on one day, but I go through the session incrementally.? I start building several trains in sequence and then use the MOVE function to simulate the

I'm new to JMRI, and have been charged with re-wiring a layout and making it work.?I've managed to draw the layout in PanelPro and assign turnout numbers, and get crossovers working, but that is as

Hi I hope this is an appropriate place to ask this question. I'm attempting to set up a two unit consist using a Loksound 5 and a Lokpilot 5 Basic and I'm running decoderpro. The problem is with the

Ken, Lou, Dave, John and any others following this thread, Regarding Ken's question 1 /Can you test, or have you observed, signals changing in parts of the layout that should not be getting any

Thanks Lou, you seem to have been on a similar journey to that which I now find myself. I too have used additional 5amp boosters. One each for three rail 'districts', one to drive the Tortoise

Thanks again Ken, I appreciate your thoughts. Just performed some further testing. /EXAMPLE / /This time,? Logix is as follows:/ /If sensor A = [changes to] Active, then set signal 1 to 'red'./ /If

I have an important question about those using the Light-It as a signal decoder and having trouble. Can you test, or have you observed, signals changing in parts of the layout that should not be

It sounds like your device is more like a USB keyboard than a USB serial port. USB supports several different types of devices. Serial ports and Human Interface Devices (HIDs, like keyboards, mice and

Nick like most things inside JMRI there are at least half a dozen ways of getting to the end. Ken's suggested scripts method is one. I prefer to do processing either in LogixNG or outside of JMRI

The program won't add a car to a train that is out of service.? All of your coal cars are listed as being out of service.? You can select all of the cars and use the tool "Set Cars" to change the

That's why I said a script that opens the port for reading. JMRI proper doesn't even know about it. You just have to code to open the device name. For Windows, that's a COM something. For Mac or

I tried changing the number of cars (moves) at each location on my train so it matches up.? the build report lists cars at out of service.? The train still doesn't put any cars on the train.? What