开云体育

Problem Statement: Using the attached config. I try to delete this sensor:? IS51 Show Route: Sawmill to Team 2 V2. On the Sensors panel, the item is not deleted but I get no error message.? I've

Jim, 1: LogixNG: IQ:AUTO:0001 2: ConditionalNG: IQC:AUTO:0001 ::: Startup 3: ! A 4: Digital Formula: setSensorState("IS101",

I know of the cumbersome IF-THEN-ELSE solution, but was wondering if there was something simpler, like some way to perform "SensorB = SensorA"? -- *Jim Moomaw* Portland, OR - Willamette Model

Jake, Have you looked at Train schedules?? You can have different trains run based on the day of the week, or anything else you can think of. Dan

Bob, You need to remove the LogixNG clipboard entry that refers to be sensor. Go to "Tools -> Tables -> LogixNG". Use the "Tools -> Open clipboard" menu entry. After you remove the affected entry

I forgot to add: When I use PanelPro to see where the sensor is used, it shows nothing, indicating it is not used anywhere.? That's why I thought it was safe to try to delete it.

PanelPro 5.10 Java 17.0 Windows 11 My config XML is attached.? It is actually working as expected and issues no errors when I'm using it. I'm new to the LogixNG feature.? A few days ago, I created

I know automations can be used to build trains, but there's no random function. I have a small layout and trains normally take 10-25 minutes to run. I may have several trains, some which run at

I'm not sure I have any specific help for you Andrew, but I also use OperationsPro for a small switching layout/puzzle. 4-6 cars are on the layout at the start/end of each session, each train brings

groups.io is more than just email. All the messages and files can be found on the website. /g/jmriusers /g/jmriusers/messages -- Peter Ulvestad Linux Mint 22.1,

That was the help that I needed. I posted it on EasyDCC Group and found it right away. Someone else replied that I might be in the wrong forum and they were correct as well. I do apologize once

You are absolutely correct. I apologize for my error. You may delete any and all references. TTFN *DAN* "I have tried to know absolutely nothing about a great many things, and I have succeeded

I did do a straight over the top update. .? I did get a conflict message up (Guilty as charged) but did not make a note of what it said! (Stupid) Good news Steve's rebuild worked, so all good

Wiring has nothing to do with JMRI and should be taken elsewhere. -- Peter Ulvestad Linux Mint 22.1, JMRI 5.11.3plus, Java 21.0.5 JMRI Users Group Moderator ( /g/jmriusers ) JMRI

The numbers are retained from an earlier drawing that I first posted. The words inside the Red Box are: This area encompasses two reversing loops. I am unsure as to how, where I should create gaps and

Peter, Did you change the COM port number in JMRI after changing out the USB-Serial device? This sort of change with Windows usually causes the COM port to change numbers. Dick :)

That is all I find as well. Someone in the group found it for me before as I could not find it then. I was able to get to it and add comment (I think). I don't know who sent that, it might have been

I would think that I added my topic in Wiring for DCC but do not find anything there. I remember when I first decided to send the message Wiring for DCC made the most sences for an area to use. My

First, I don't understand what you mean by following the links on the WEB SITE. I have looked through all my mail including the Trash Bin and found nothing except the Manifest Creator related

How did you upgrade? In place overwrite, the normal method, or something else? I suspect you’ve just lost the pointer to your data. I just update over the top. Always have, always do, and have