开云体育

The signal logic should be looking at Held and setting the signal to stop. What is controlling your signal? Bob

Thanks.? Printed it out and will give it a try.??

Well, I did a lot of searching with no success. Here I am. I have a panel that's getting busy. I want to split up the functions to separate panels. I'm lazy. I don't want to create another panel from

It looks like the ESU Detectors service did not migrate to 5.0 I just checked 5.2 5.0 and the both fail to initialize the detectors. I checked 4.26 and it works. Table Sensor is populated with the

Wilks, Is it possibly a Broadway Limited FA-1 Diesel - Paragon 2 diesel decoder ? Not enough information to know for sure.

Except that it doesn't do that. The ICON on the PANEL goes to stop but the actual signal on the railroad is still clear or whatever. -- Tim D. Childs tim.d.childs@... -- Stand firm for what

By contrast, if the signal where an ABS (automatic block signal), the stop aspect would change as soon as the train exits the next block. -- Ken NYNH&H, Old Colony Division, Cape Cod Branch

Held state puts the signal aspect to stop. Typically, a held condition exists in a CTC system when a train has a proceed aspect on the signal. Once the train passes the signal, the signal drops to

So are you saying that all the sounds available for a "particular Loco type" come preloaded in that decoder and can be "customized" by choices with CVs? That certainly sounds like an acceptable option

I need some help understanding what the Held property of a signal mast does. The JMRI signalling page says nothing other than it exists and web searches turns up a few developers discussions that

Hi Pete, That seems to have worked as what I did was change the Format in Manifest Print Options to Tabular and Standard and that seems to work pretty well. I want to continue experimenting with this

Yes. All of the features have help content. I learned Logix from the help content. I have so far been unsuccessful learning LogixNG from the help content. I'm not sure what the difference is. I think

HI Guys: Im building a new digital layout -- this one I want to use custom loads, and also staging yards. I am currently setting up test file in JMRI to make sure I have things right I have East

SoundTraxx Tsunami decoders are ordered based on the type of loco you have, EMD, GE, Alco, etc. ?each decoder will have several prime mover choices, several bell and horn types, several headlight

Test version 5.3.6 of JMRI/DecoderPro is available for download. This is the next in a series of test releases that will culminate in a production release, hopefully in Summer 2023. It's really

David, The link I'm including is to a Soundtraxx document that discusses how to use CV values to identify their decoders. Even if the version of your JMRI/DecoderPro installation is out of date, you

Everything I do is geared towards operations. So my comment should have said “ with the popularity of this thread hopefully the brains behind the programming will add more features to allow

Yes (if you mean programming cvs) and No respectively Phil G

I have a Power Cab system running N scale . Will Tsunami be programmable and Sound files downloadable with out any extra hardware?

5.2 JMRI LCC CDI appears to not sort LCC Nodes correctly for Name or Description? Name sort seems tripped up by the Node address field for the seven nodes currently used: ?Nodes numbered