开云体育

Sorry Peter, my mistake, I didn't realise! Steve

Discussions on CAD software is off topic for this this group. -- Peter Ulvestad JMRI Users Group Moderator ( https://www.jmri.org ) Tam Valley Group Moderator ( https://tamvalleydepot.com/

Circuit/PCB Design All, Any suggestion on the best free Windows software for this? There are various out there and one called KiCad caught my eye. I felt like trying to put a design together and see

MRFC522, Nano/Uno/Mega Serial Ethernet Tom, I thought I'd try this setup with another computer and JMRI using the Serial output, just in case it was some sort of problem with my laptop.

Sounds like you have Crew Alert enabled on one of the locos. Crew Alert - Train Control Systems Documentation (tcsdcc.com) <https://docs.tcsdcc.com/wiki/Crew_Alert> In DP, it's on the Sound

Download the exe/dmg/tgz as appropriate for your target opsys to a removable media (SD card/USB drive/etc). Sneakernet to your target machine. No Internet needed for install from the removable

Roger, Try using the "Properties" right click menu item for the memory icons to set the attributes. It combines many of the attributes in a single dialog. Dave Sand

John, I am surprised that the manual NX process even works. NX pairs have to have a consistent direction of travel. You have the pairs going both ways which is contrary to block routing logic,

Thomas 1.? DCCEX can drive locos on the programming track, but you have to issue the <1 JOIN> command for that to work.? That command can be sent via JMRI, or it can be incorporated into the setup

Dave, The system console shows no messages when I run the LogixNG to make the NX pair active. I can, with Logix NG, make the NX pair disabled or enabled, however the Exit Entry "Add Entry Exit

Not sure what you are asking, but I assume the GPIO pins don’t work like you expect. Did you add the GPIO software routines to the PI? I use SteveTodd's free software image for Pi-OS and JMRI

I forgot to add I am using JMRI Ver 5.3.1 and Java 11.? Sorry.

I use a layout editor panel with train tracking for my dispatcher to control train movements.? The default memory icons displaying the train info were too small to read comfortably, so I edited the

Tom okay, so I have done some extensive tests with the Uno/reader and Uno/ethernet/reader. I still have the same problem. Both work perfectly until connected to JMRI as a direct serial connection

Works (for at least one reader) but definitely still under development.? Issue is with coordination between ESP32 library version and MFRC522 library. Should we take this discussion to the RFID4MRR

If it has a DCC decoder, it’s compatible with JMRI. I recommend you take it to someone who has a self-contained DCC system and try it there. It may just be that while it’s working, as in

Weird. I wish we could look over your shoulder, because I can think of no reason for what you're seeing. I have the sneaking suspicion that you are doing something we're not thinking of which we'd

Hello again and thank you for your help, that is very nice of you all. Changing CV29 to value 34 and clicking write changes to page/write changes to all pages did not yield anything new. I tried it on

I have a pi4 8gb running g 64 bit rasputin and the latest JMRI. All works great except when I select Raspberry pi gpio? and I get error message, cannot connect to pi, as this expected when not using

The only decoders with that many functions that I am aware of are ESU and Marklin. Seeing there was a recent thread about using 63 functions with a Lenz controller I assume they have a decoder