开云体育

Thanks Cliff I'm with yah! I've cleaned up the script errors (with the exception of "RJE Walthers Turntable.py" which shows an?ERROR only because I temporarily renamed it as it does not work properly

Bob, My fat-finger actions got in the way again with an unexpected "send" Continuing from the last note: Once you get the turnout issues figured out, or perhaps upload the panel file to the "Problems

Bob, Thanks for the additional information. Perhaps the safest approach is to start at the top of your session.log report and fix the Panel errors before trying to figure out what is going wrong with

John, I'm not sure if the SSL currently works by deleting itself if the things it depends on (turnouts or sensors) don't exist or that it tries to create them. In general, if one part of a load has

Another solution (besides aggressive which has some unfortunate side effects) is to list that location twice in the route, the first will be pickups only and the second will be set outs. That will

Cliff? Thanks very much for directing me to the "request information message".? I must admit I had read it before (or rather "skimmed"), and thought it applied to if you could not get JMRI to work

Hi Nick I started with?Layout?Editor, and found it a bit restrictive as far as how the visuals of the panel?I created, so I switched to Panel editor a few years back as it seemed more flexible.? I

Dan Yes that is correct, there was a train built. the train was leaving with 10 cars at 478 feet and returning with 15, putting it 192 feet longer than the track length. I rebuilt the route and the

Bob Thanks for your changes. The Blocks now appear under the correct columns now in both Firefox and Opera using Build #44. What the Blocks table does highlight is how the Blocks are all defined twice

On Mon, Feb 3, 2020 at 09:51 PM, Dave Heap wrote: User Files Location: C:\Users\Mike Swederska\Dropbox\JMRI\ Profile Location: C:\Users\Mike Swederska\JMRI\Meramec_Valley_Lines.jmr = = = = = = =

I also uploaded screen shot captures of the warning pop up windows to the files section folder "block error issue", file "block errors.pdf"

Wouter, Will do tomorrow or later tonight. Mike Swederska Sr

Thanks Mike, that worked. Ken

Mike, For the program to be reserving track space, there has to be a built train.? I would expect the built train to terminate into staging using the track that has the reserve value of 192 feet. Dan

From your description, it is not clear that you created the turnouts in JMRI.? The fact that the PowerCab can control them does not mean that JMRI can until you have created entries in the Turnout

Dennis, If the dispatcher had access to the JMRI panel, there are train icons that he could use to understand train length and number of cars in the train.? With regards to "Call Time", I don't have

Hi Bob, I use PanelPro a LOT but I have not loaded Version 14.8 or higher on my system yet. The current version I am using is 14.7.4.? Since you mention "pallets", may I guess that your are using

Hi Mike, If you answer 0 of the 2 questions it's going to be difficult to keep those helping here motivated. Wouter

go to locations-click edit the rip track-go to tools and click show cars. Then go back to tools-cars-print Mike

Hi Since upgrading to the latest version, JMRI seem to be ignoring track lengths. My latest build has a staging track that is 500', used is 478' and it is reserving 192 more feet. this is not the