开云体育

I use all Apple stuff and Macs. Really simple with them. Just turn on time machine, select a drive somewhere on the network or attached to another computer on the network or to a network drive and

Marc, Yup, fixed by PR #8004, available in build #3621 or later. Once 4.19.3 is released I'll close issue #7998 ( https://github.com/JMRI/JMRI/issues/7998 ) Steve "Breezlys"

I have my Decoder Pro and JMRI Operations on my laptop. As I was working on building a train my computer went off and would not come back up. We I had dislodged one end of the batter. Plugged in back

Hi ON a Pi, or most other Linux systems you can add a udev rule. In?/etc/udev/rules.d? ?add a rule. Call it something like jmri.rules. It should/must finish with ".rules" IN that file put

Terry could you please elaborate on this? I am playing with SignalMasts over DCC decoder using NMRADCC library and can see the same very extra 0 at the end of extended accessory packet.

This issue has been address and resolved in Jenkins build 4.19.3, Tested it on? LB-USB > DCS50 Zephyr?? and Track power remains off. Tested it? on the Digitrax PR3 >DCS50 Zephyr ? and track power

Dave in Trempealeau this question is for you.? I searched but only found thousands of sites related to 4 legged cats. Dave...in Colorado

Solved.? Problem was with how the RPi assigns ports.? When only the DCC++ was connected it was assigned ttyACM0.? When two devices are connected the first one RPi recognizes is given port ttyACM0

Thanks everyone - I created a class called runTask? and called it with the standard invocation? runTask.start() as Bob suggested and it worked for me. Billybob - sorry did not know about the

James, Your issue contains some deep programming issues and may not be of interest to the average jmriusers list member. The jmri-developers.groups.io list is more programming-oriented, and is a

Take a look at the jython/BackAndForth.py sample script. (In the JMRI distribution or here: https://www.jmri.org/jython/BackAndForth.py ) It creates an indepedent thread via the AbstractAutomaton

Thanks Steve, the main problem has been resolved, actually quite simple, I had a turnout MT+N0E9 as well as MT+N0E09, same for E6 and E7. Checking the turnout table in 4.14 only showed N0E9 and not

The release notes already cover how to use the old CSV API by linking into the documentation for setting JMRI parameters. The draft release notes for 4.19.3 are at

Dave, You should do the test of watching /dev while plugging and unplugging the devices. From the confused traffic, I would suspect that the picks might be reversed for the ports. ttyACM1 and ttyACM0

Dave, You might want to check the Edit->Preferences->Defaults, it may not have the selections you think it should. It may have some things defaulting to the LocoNet that should be on the DCC++. -Ken

One more thing, on the PR3 the green LED is mostly on and winks off and the red LED is on solid indicating no LocoNet signal.? So yesterday I unplugged the BDL and plugged a LocoNet cable from a

Hi, I have included a small cut down version of something I am trying to do. I set up a propertyChangeLlistener for a sensor. When the sensor is activated it runs. I have simulated it running a long

Thanks for the help! I created the Decoder File for the Digital Bahn WaLD Decoder and it works. So from now on, i can set up the interior lightning stripe with decoder right aut of jmri. I think, i

I have a small track that has been successfully running DCC++ connected to a Raspberry Pi currently running PanelPro 4.6.? I am attempting to add block detection using a BDL168 and PR3.? I use

John, Yes, as long as the "User Files Location" for both profiles have the exact same file path. If you are also doing decoder programming, you want to make sure the "Roster Location" for each profile