开云体育

Cody, Was your Father's MCII originally shipped with Android 6.0.1 or was this, somehow, updated? Only the MCII relies on some custom modules added to the Android core by ESU in order to work with the

No words to describe it...... NCE Interface cycling with RPi-4 no a Laptop but a RPi-4. https://vimeo.com/user107130301/review/382553929/9fed744bcb Inobu

Bob, This almost certainly indicates you have an NCE Power Pro system. Power Pro CV Limitations ================== Due to a firmware issue, the NCE Power Pro is: - Capable of reading values correctly

Inubo and Marcus, Thanks for the logs. I've performed some timing tests using both Mac and Ubuntu to test the power-up delay of the NCE USB and Power Cab. 1) The NCE USB power up cycle. I made sure I

After several unsuccessful attempts, I did the upgrade to 4.18. Did incremental updates per recommendations, and finally arrived at 4.18, which appears to work. Can read and write most pages, but on

Marc, Yeah, its all kinda of variation with the jumpers, Version and sequences that contributes to the lock out of the NCE USB interface. It will go into a 20 lockout cycle which throws you for a

This has been noted often of late. The 7.x.x? being returned half way down the log. Sometimes going unnoticed : -) Most common cause is wrong jumper setup.? Those reporting the issue and log were

Dale, removed the consist.XML file and wifi is working again with Version 4.18. Thanks for the help. Dave

Marcus, Notice log 2 and 3. Log 2 is telling us something. Notice how the EPROM update is reported last. Look at Log 3 and the EPROM is reported in the beginning of the LOG. If I recall

*LOG 1* This is the initial Log from a new copied Image this is the failure caused by the v6 96 settings. 2019-12-17 10:52:57,971 util.Log4JUtil??????????????????????? INFO? -

Again I don't plan on changing anything other than showing a measured distance onscreen while editing; any lengths that you've setup in blocks, routes, etc. shouldn't be effected. And it will be 100%

Hi Bob. I was pretty sure I? had installed the 64 bit version and so I went searching for it to verify that before I said anything. It turned out that bits and pieces were here and there, but

Hi Larry The issue that was fixed with the resistors on the Power Cab Panel (PCP), was due to different Part Nos of the RS485 Transceiver. A simple test to see if you have the transceiver problem is:

Where have you been Larry......lol Inobu

Larry, Thanks for making the screenshots. Unfortunately most/many of us can't view them because we seem to need a Box Account to view them. Please create a folder in the ProblemsBeingWorkedOn folder

Here is a link to a folder with images of screenshots: Screenshots ( https://app.box.com/folder/98587531574 )

I have created issue https://github.com/JMRI/JMRI/issues/7835 to address this.

Thanks. Rather than overwriting the files in the JMRI directory, please rename or delete the JMRI folder before extracting again. Certain files are not overwritten, resulting in unexpected behavior,

First off I want to thank Inobu and Dave for their input, time, and dialog on this subject. ?I had no idea it would create this type of interaction. ?While I'm pretty good with computers and can

Marcus, I need to set it up again. Hold on Inobu