开云体育

David’s explanation is right, but should be prefixed. If you’re just _using_ signal masts, you don’t need to worry about any of this. Look at the various signal systems linked on this page:

Hal, In order to understand the internals of signal mast logic does require looking at xml files. When a signal mast is defined in the JMRI Signal Mast table, the Signal System and Mast Type are

Hi Dan....THANK YOU....That worked....This IMac is new and was a gift from my daughter for my 82nd birthday so I had to use its, NOW I love it but still a lot to learn. THANK YOU.....Frank in Houston.

Hi Bill, This is a new MERG CBUS bug, being progressed via https://github.com/JMRI/JMRI/issues/7431 Steve.

Richard, I assume that your are using Layout Editor. Is "Options >> Use Direct Turnout Control" enabled? Are there any error in the system console. Use "Help >> System Console…” Dave Sand

Thanks, Marc. I already did one of those tests, as I first just entered the DCC address of the loco with the Zimo decoder. When that controlled function F1, which turns a home brew sound generator on

Read CV19. If not 0, the command system has it in consist, and you need to use that number as address. Some systems set this in background, do on their throttle is looks like cab number, but

Thanks, Billybob, vey helpful. I was just trying to figure out what the logic is as described in the "JMRI Signal Mast Logic" page. There it says (italics mine): "Which Aspect our source Signal Mast

Thanks a lot. I have tried to keep to your style, but may not have succeeded. Please make any changes you feel necessary. Bill

Hi Tim, I have tested your panel file using a?simulated Loconet connection and simulated OpenLCB connection. These simulated connections are to represent a layout connection when you've got no

We are running JMRI V 4.17.4 and Digitrax DCS 240. Closing OpSw 36 with JMRI has no effect on the command station. To clear all slots we must use the loco reset button on the DCS 240. Is there any

Mitch, Delete the section the sensor is working with then try to delete the sensor.? I've seen a few cases during recent JMRI versions where the programmers would not let you delete an item until

Any ideas, anyone? -- Thanks Mitch

Thomas, Any progress on this? --SteveT

The 4 new points I installed only work when My Layout is in edit mode. Any idea what I have done wrong? Thanks for all your help. PanelPro 4.16 RasPi Java 1.8.0-65 Switch 8 to Tortoise motors Insufrog

You may recall I have been unable to control old Lenz LE103 decoders with JMRI throttles, although I can control newer basic NCE decoders and SoundTraxx Econami steam decoders, at least the one of

"Haltz" (or whatever "friendly name" you would prefer), Setting up JMRI "signal mast logic" _does not require_ that you modify any "Signal Mast Appearance definition file" if you are using one of

Hi Jeff You said the USB to Serial cable worked in your mate’s computer, that confirms the Cable is okay. From your Console Log, it shows COM 3. Make sure you are using the SAME USB Port on your

Is your Mac editor "TextEdit"? If so, try pressing Command F.

Jeff, One trick is to confirm if the serial out to the command station is working. The trick is you need to look real close at the 9 pin connector and then jumper pins 2 to 3. If you do this, then