开云体育

David, From the Digitrax website: Combination Advanced LocoNet? Command Station and 8 amp CTC booster -- Peter Ulvestad JMRI Users Group Moderator - http://www.jmri.org ( http://www.jmri.org ) Tam

/On 8/17/2019 2:21 PM, David Klemm wrote:// / ??? Humm, how about a DCS100, a DB150, and the newer ones.?? I think we are having a problem with words here! A booster is simply a power output

Dave, I'm assuming what you are saying is that I should be able to go into the Raspberry after the crash via the ethernet route and change the file names remotely.? Had not thought of that. Roger

Wayne, It is an either or. The unit is a command station or a booster. I know of no Digitrax unit that at the same time is both a command and booster. So even your clarification below is still worded

Thank you gentlemen!? This makes a lot more sense now to think of the siding as an interchange track. I have one more question below (in case you want to skip the details of how I set it up), but

Roger, That's an unnecessarily drastic approach. Simply (temporarily) renaming all of your scripts (and panel files if necessary) that you have set to open at startup would enable JMRI to start (it

That will probably work for Jim. I was looking for one that emulates the .csv file produced through the Export to file function in Operations>Locomotives>Tools with the Location listed. I know Dan

Configured was probably the wrong term but for clarity: The DCS240 is used in our application as a command station and booster. Op Switch 2 is set to Command Station. Wayne

Jim, Try running RosterCsvExport.py and import the resulting file into Excel. In DecodePro, select Actions >> Run Script…. In PanelPro, select Panels >> Run Script… Dave Sand

Yes, but I think you have to use PanelPro. If you use Panel Pro you can also export Cars, Locations, and Trains to .csv files. You can then open them in Excel. You can then either save them as .xlsx

Ken, I always have the console log running.? Evidently the Raspberry JMRI program didnt like my InitialLayout.py script and bombed Java.? That stopped JMRI from running anymore.? I could not figure

Wayne, what is meant by DCS configured as a booster as well. The DCS240 powers a block on our layout as well, but op switch 2 should not be configured as a booster. Not sure if that's what you

Roger, Sometimes, even when crashing, the console log gets a message. Look in logs/session.log right after the crash and before starting JMRI again. It may have a 'last words' that point to why that

Ken, Got confused on the sensor naming.? All good now.? Any yes, a space in the user name seems to be ok.? Just went in and did some checking and made changes changes to the script so it works

Randall, What is needed for getting the web side fixed? Is the console log enough or what other data should a user provide so the developer can fix it? For some layouts, it's a lot of noise in the

Roger, Is there a copy of the file somewhere? In some versions of JMRI there could be extra spaces as part of the name that don't show on the table. I've got lots of scripts and usernames that have

These warning messages are deliberate so we can track down Web Panel XML that are not providing system names and ensure system names are included in the XML provided to a web browser. I'd expect those

Thanks for the encouraging comments. I had tried to create a 'duplicate' panels a couple of times but I gave up when I started to get warnings about incompatible connectivity as I added the

Is it possible to export the contents of the roster pane to an Excel spreadsheet? Thanks. Jim K

Maybe these are only nuisance messages, but I spent half a day chasing symptoms of another problem intermixed with noise. Using either of - PanelPro version 4.16+R6f9aced - PanelPro version