开云体育

Hi all, I have a combination of latest stable JMRI on Lubuntu (or Mac) with Sprog Nano with the following: During start up * Load WiThrottle server * Load Webserver * Load my railroad config *

Hi Tim, Am thinking that this isn't CBUS related Another quick thing to test, does it work when sending event 503 from the event table? What feedback mode do you have set for the

I don't remember the details - I worked on this 4 years ago with @kjlisby - but there are differences in the LN implementation between IB2/IB-COM and IB 'one' (or Fleischmann TC); and a number of IB

Hi Steve,? Yes its a little unclear i will admit. basically the panel never updates the turnout position, IE the icon doesn't move? when the event "503" is sent from the CANCAB.? The turnouts

Hi Tim, Yes, the same Steve Young! Thanks for the GIF however I found it a tad awkward to understand! The one thing I spotted was that there was an incoming short event containing a node number,

Hi Bruno, since the autoidentify is not working, you should disable it (there's a desktop icon for that). Then open PanelPro and select a similar profile, or just create a new one. Then set the

Hi again; Regarding RailDriver support, it would be nice to have it as a Jynstrument, like I did for Wiimote, various USB pads, and even a DCC throttle, see code in

Hi; regarding video playback in a JMRI throttle frame, I had build something a while ago, I think the code is still there ( jython/Jynstruments/ThrottleFrame/VideoView.jyn ), see this video (

Hi Steve, Thanks for the link, i did try that but to no avail, enabled or not it seems to make no difference. I can click on the panel editor and it does change the turnout, but the panel doesn't

Thanks Dan and Peter. Dan, I thought CSV was most likely the easier and more efficient way since the columns would be easier to manage. I never thought of first exporting a "dummy file" with no data

hello Steve, First of all thanks for your hard work. I downloaded your early January 2019 version. I'm having a Lenz LZV100 and normally use my Lenz 23150 Li-USB to connect with a WIN10 to my central

Cant seem to edit the last post and both links go to the same image - if you scroll back you can see the default preferences

Thanks for the reply and suggestion. I have checked that and everything says that it is set for the Z21 :( I have placed 2 screenshots in an album for you to see Defaults (

Check the Preferences, Defaults? if they are all on Z21 and not on Internal or some other option. I do not own a ROCO system but I played around with PREFERENCES and can replicate the issue (greyed

Not sure if this page helps. http://jmri.org/help/en/manual/JMRI_OPS_UsersGuide/Ops_ImportCarsFile.shtml -- Peter Ulvestad JMRI Users Group Moderator - http://www.jmri.org ( http://www.jmri.org

Jerry, Better off using the CSV file format.? One trick is to do a file export and you'll get a CSV file with all of the fields labelled for you.? Enter your data in the appropriate columns and

Hi folks, Just to clarify, Variable light intensities are NOT available for MERG CBUS at present, the only valid intensity values are 1 and 0 I've got some notes ready to go if / when someone wants

Hi Tim, If the turnout table is changing to the correct state when messaged from the CAB then that's good :-) This sounds similar to?/g/jmriusers/topic/28956227#155651 ( Changing

Thanks for all your suggestions: I will explore some more of the suggested options in the future.I purchased a new HP Laptop today for less than $400.00 it has all the options I was looking for. the

I read that you can develop the Operations Pro roster either as a space- or comma-separated vale file. With all the categories that can be entered, how does the space-separated file distinguish