开云体育

Thanks Steve, From what I have gathered this driver is for a CANUSB and CANUSB2 ( NOT CANUSB4 ). Mojave should auto recognise a CANUSB4. Will be adding this to the MERG hardware connections page,

Hi all,? I originally mistakenly posted this as a reply to message #155575, sorry Mike S.? and thank you for responding anyway Ken C. :)? ? I am a high school computer science teacher and novice

Just loaded 4.14 on back up laptop to look at and try and got the following errior?? "Parse Error" "The content of element type "options" must match { train options {row color options {

Steve Thank you for your notes, it is via a CANUSB.? Most certainly, please repost on the MERG support page. Would you retain the credit to John (G8GKU) as this is very much his research and

Ken, Dave, I never thought about it that way, the Power Cab has no track power switch so it cannot work. Thanks for the help, I will put this one down to a senior moment. Derek.

I relooked at the FTDI drivers. I downloaded the VCP versions, reinstalled and tested. ? Victory ! Thanks, Dave

Sven, Check Options >> Use Direct Turnout Control in the Layout Editor menu. If it is checked, then the right mouse button will throw the turnout. If it is not checked, then the left mouse button

Hi all, Getting started with Layout Editor to control turnouts on my layout. The turnouts are controlled by MERG CBUS modules. I have defined them in the turnout table and can change them between

As part of getting my technicals right before I go deeper or more complex; I have come across a few technical issues/questions I need some help with: 1 - Sensors I have Ir detection devices near the

George, No problem with helping out. Just to be safe, I recommend that you upload your current panel to the ProblemsBeingWorkedOn folder. That will provide us with a known starting point. Dave Sand

Solved the command station issue, silly mistake.? All decoders seem to be responding to programming from the command station so I'm figuring the issue is most likely with the PR4.

I have been working away at the Table Records using a Non-Specific System and INTERNAL Blocks/Turnouts but with *correct User Names* using LE as part of getting ready to create a new configuration

I do believe the correct power supply is a PS14.

Thank you all for the input. ? I have taken the following steps since my original post based on the advise in all the responses. ·??????I’ve updated to the 4.14 JMRI latest test release.

I have a layout on JMRI layout editor and I want to be able to see when my trains enter and exit a block. I have one BD4 (Digitrax) installed and have assigned 4 blocks. I have to reconnect two of the

It’s been in my queue for a while to add open/closed line/point sets to LE. (I want them for the same reason.) I may just be ready to start this now… Shake your magic 8 ball and… “Ask again

This means that some other application is already using the port. To determine who has your serial port open use “lsof” in terminal. Quit or kill that process to free the port. The “Serial”

The part about "Serial port cu.usbserial-A9KJ71D9 is in use” is what matters here. It seems unlikely that some other program is using that connection (unless an older run of JMRI is still around

Stefan, Thanks, but I don't think any congratulations are in order. I simply installed my PR4 as per the Digitrax instructions and set up my profiles per the JMRI instructions. (I'm anal that way. I

Thanks. That’s really becoming a problem. The main JMRI web site was moved to jmri.org a while ago because SF.net keeps crashing and doing wierd things. In this case, the actual file at