开云体育

I don't understand that question.

Thanks Steve, The panel is really quite small so I decided to recreate it but it might be a good exercise, like we need more that that right!!! Ok, so without running the cmd will this also have the

I tried to upload the custom icon set to the files area but received an error that images could not be put there. Alternate? Allen

It is my recollection that the instructions with the signal head decoders will tell you if you need to use the offset address or not. It is different for different signal head

Dave, More errors now: 2018-08-29 17:45:04,821 dispatcher.DispatcherFrame??????????? DEBUG - trainID:WP583, tSource:1, startBlockName:IB1, startBlockSectionSequenceNumber:1,

*** Hi, *** ? *** Hi, I noticed when adding a signal Head using a DCC Signal Decoder, the box labeled "Offset Address" must be checked for an NCE DCC system.? However, when adding a

Clive, ? ? Have you tried the "Rebuild Roster" in the Roster window yet? Roger

Nigel, Bob Thanks for the suggestions. Unfortunately neither have helped.? I am an experienced JMRI user and was aware of the possible settings issue.? I also can confirm the correct program option

Rick, It sounds to me from your last post like maybe you did not read the entire decoder into decoder pro. Two ways since you have a lokProgrammer. The fastest is to follow Dave Heaps instructions for

This is a very interesting area, and it’s great that you want to think about it! You might want to look at some of the existing code. In particular, some of the complexity of the Path class

Dave, Tom, interested parties, I don't get to install as many Lok sound decoders as i would like as the customer decides not me. At 70 years I get a little rusty between lok installs. Toms comment,

Gabor, Right now they are tracking down the issues in the code for the rest of the reporters to work. It's just a matter of time to get it right. From the discussion, it will be fairly quick as

Check in the lower-right quadrant of the main DecoderPro (roster) window that you don’t have “Edit Only” selected. Bob

Ken, Reading through earlier posts, I am sorry for misreading your " ...does confirm.." for "...does not confirm...", making our already hard-to-follow topic even harder to follow. Gabor

Suggest you check the “defaults” tab within “preferences”. There have been a lot of cases where various elements move to “internal” rather than your actual system. That often deals with

Have been using JMRI DecoderPro for several years now but getting issue with latest installs. Set up is programming track accessed via Digitrax PR3.? Running JMRI 4.12 (had identical issue on

Dear JMRI users and developers, In my topic entitled Scripts I was asking for help in a problem that arose from my drinking in advance for the skin of the bear as we say in my native language, when I

Good morning I use JMRI PanelPro..Operations and a strange situation has developed which I have tried to correct but have not been able to NORMAL PLAN (Works on TWO other trains) Train 50 runs a

Here is the link for Tripp Lite and the Keyspan adaptor. It is the Mac 10.12 and 10.13 one on the list. https://www.tripplite.com/support/product/part-number/USA19HS

Bob, Thank you! That's a clear description of a way for me to implement JMRI with my interface. I will use it, as soon as I get the railroad control computer running again. When I started it up after