开云体育

Richard, I've never messed with quills much but look at the 'Sound Function' tab then the 'Function 4 Sound'. All 3 quill lengths are listed for each horn. Isn't that how you would select which

JMRI will not allow me to delete this file

When I uninstalled decoder pro would that have not deleted all related files?? I have now downloaded 4.13 and I can get decoder pro to open however the problem that I have now is I cannot select a

Dave, ? ? Thanks for direction on the turnout symbols; the problem resolves itself after the first usage and isn’t as serious as the throttle. I will try the suggestions. I uploaded

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the [email protected] group. *File:* Throttle 2072318.xml *Uploaded

This suggestion is based __ENTIRELY__ upon your lead in statement: If you had more experience with JMRI or had a investment in previous data files for JMRI, what follows would be ill advised. The

Paul I am at the convention and I will ask DIGITRAX boss that question I am using a dcs 100 and it’s not enough power to program the new limited decoder ver 3 As I indicated I can change address

Patrick, The turnout icons are correct. They indicate that the current turnout state is “Unknown”. There are a number of methods for setting the initial state. Since I am usually using a

Hi Mark, How/where are you creating the consist? --SteveT

I'm hoping that I'm doing something trivially wrong because I'm sure this bug must have been reported long ago. I can't get the check box for selective sound in consists to work as advertised. I get

The System Console is pasted in this message. A screen shot of the control panel is posted under "PanelPro v. 4.12 Save & Re-Open error". ? The turnout icons don't display properly at startup. When

I've loaded Decoder Pro 4.12 for the 1st time and went to set up the program settings, all went fine except later found that I set COM PORT to 3 and should have been 4. When I restarted the program to

This is a modified back and forth script that includes opening a window to select a decoder address. # Based on script 'Back and Forth with mid stop'. # Listens to sensors, running a locomotive back

When you get the panel load error, go to "Help >> System Console". Click on the "Copy to clipboard" button and paste into a reply. The turnout symbols vary depending on the panel type. Are you

Test version 4.13.2 of JMRI/DecoderPro is available for download. This is the next in a series of test releases that will culminate in a production release, hopefully in December 2018. If you are

Hi All I am completely new to python and python but was intrigued by the sample scripts. I am trying to learn how to integrate the 2 scripts above so that the Loco Selector box is called and that

In JMRI PanelPro v. 4.12, control panels do not save and open properly. Standard turnout symbols display with broken lines. More important, throttles do not reopen after being saved. The following

Hi, In the SOUND pane there are no options for selecting short, medium, or long quill. I checked with J.D. at TCS and the decoder has those options. I checked three different diesel prime movers and

I am coming to this late, but I wanted to make a comment about something noted here... JMRI already HAS a consist tool: http://jmri.sourceforge.net/help/en/html/tools/consisttool/ConsistTool.shtml It

Agree that it would be good to rule out setup. To help separation of debugging, I recommend trying to read CV 7 and 8 using a _Digitrax_ throttle, rather than JMRI. That’ll give the same mode,