开云体育

Thanks Dave for much appreciated response I opened the file with an xml Editor and fix the problem, now everything works fine shows the right Tables and creates no IBs Blocks. I'll continue with the

Ken, Thanks for the explanation. I now know how to fix the issue without using a text editor. Did I miss this change in the Release notes? Marshall Sent: Monday, June 19, 2017 7:23 AM To:

Scott, Here's a few tips. Ensure that the designer is in your area. Ensure that he provides you with the supporting documentation. Ensure that the deliverables are understood and noted. Ensure that

Hi Stu, Others could explain the _benefits_ of SignalHeads vs. SignalMasts better than I, but inside the Dispatcher code, there are some unavoidable differences in the logic. I use SignalMasts, so I

SteveT, I found a plugin to compare the Project that AndroidStudio imported to the original Eclipse Project. The import rearranged the folder structure and is telling me that the is over 1700

Setting up consists and decoder consist settings with NCE systems are quite different from any other brand of DCC system, due to special helper features in the NCE command station. The correct way to

Are you using advanced consisting ? It should work there ......Mike [jmriusers] <jmriusers@...> wrote:

Not really what you want, but you can always set the whistle and bell volume in the trailing loco to 0. Then, at least, only the lead loco will respond with bell and whistle sounds. Roger Thomas

Sorry about that, I know that but old habits are hard to undo, maybe that dates me before JMRI time when it was called exactly that. Al Babinsky Sent from Alto

Try assigning it as a 4 digit number.

Hey Guys, I have a couple of questions on setting up a consist. I am using an NCE Pro Cab unit. I have two BLI K4 Pacifics that I am running as a consist. It has been my assumption that in a consist

The 2-digit and 4-digit terms for loco addresses are actually incorrect and misleading. These terms are never used in the the NMRA DCC Standards specifications. That is why we have moved away from

Hi Leo, Couple of things to consider with the update you installed - very clearly the message stated that it was to be considered experimental due to the number of changes implemented. I assume you

Hi VInce IBn block names are created when place a piece of trackwork on a panel and the name for the block that you typed in does not exist. It creates the block with the name you typed in and a

Glad it worked, Al Sent from my Verizon HTC Smartphone ----- Reply message ----- From: "'Roger Traviss. ' rogertra@... [jmriusers]" <jmriusers@...> To:

Hi Steve, If the signal logic is set up correctly then each signal sees the one ahead so if there is a single virtual signal ahead of the last signal on your layout then the virtual signal goes to red

That was it. Thanks. Roger T.

That makes sense. I'll give it a try. Thanks. Roger T.

RJM, On which should be 'Internal' and which should be 'LocoNet' (or other real hardware). When there is a real device that either is something you control or listen to on the layout, those (usually

Roger, if you assign 151 to the engine you have to use 4 digit addressing and type in 151. 127 is the highest number for 2 digit addresses. I suspect the you used the 2 digit address and when you