OK
Another small step. Some decoders have a “disconnect” mode where you can power the prime mover WITHOUT engaging “drive”. If this is selected (or not actively unselected), you will experience the same symptoms
Do you have the original doc for the sound project??
toggle quoted message
Show quoted text
On 5 Apr 2025, at 10:21, Don Shroyer via groups.io <Donshroyer@...> wrote:
?
Phil G,
?
Changing CV 29 to 7 results in the loco responding to the short address in the same way as previously reported. Meaning sounds are fine, but no loco movement.
?
Regards
?
