开云体育

Ken,

AAR-1946 is similar to PRR-1956. ?If you use a xml aware editor such as NotePad++, you can do a search for AAR-1946 and replace with PRR-1956. ? This will change the signal mast system names. ?This only works because the mast type names are the same.

I recommend that you delete all of the signal mast logic first. ?Store the changes. ?Then do the search and replace and save as a different name. ?Then start PanelPro and use Tools -> Signals -> Signal Mast Logic to do the Auto Generate Signaling Pairs.

If you want a really clean reset, run the GrandReset.py script using "Scripting -> Run Script". ?This deletes transits, sections, signal mast logic and block paths. ?Do this before the signal system rename.

You also have 4 signal masts that are defined using the "DCC Signal Mast Decoder" driver. ?These create errors during xml file loading.

I also noticed there are some turnouts that have signal masts attached but don't have icons such as LT2. ?This can be fixed by right clicking on the turnout and select Set Signal Masts. ?Set "Right Hand Side" for each mast and click on Done.

Dave Sand