Not directly, no. But what you can do quite efficiently to retain all you did while working with the wrong definition is put it on the programming track, read type from decoder, go to the sheet with all the CVs on it and then read all from decoder. Have a coffee. After a longish while the reading will finish. There might have been a few read failures on the way, so sort on the status column so you see those bunched together, and retry just those until all are read. Then you're good to go.
On Mon, 11 May 2020 at 12:02, Jamos Bond <jambri@...> wrote:
I have one BLI Challenger it reads all the functions and names for them correctly i used steam with depleating smoke decoder. I have another BLI Heavy Pacific I used rolling thunder (prolly should of used steam) and all function names are blank on throttle. They do have the same functions is there a way to change the decoder type?
