This goes against the method I've used in the past to "update" JMRI. Steve Todd in his reply to #153540?
"JMRI update on a raspberry pi". cites how I've always done it.?
"Regarding updating JMRI:
Note that updating JMRI will not have any effect on your user files location or your roster.
If your rpi can reach the internet, you can update JMRI from the RPi's web browser.?
End PanelPro from the RPi desktop.
Browse to jmri.org and click on and download the JMRI.xxxx.tgz file to your RPi.
When the download completes, click on the filename at the bottom of the browser, which will open Xarchiver.
Click the "Extract files" icon in Xarchiver.
You will be prompted with an "Extract to:" location, which will default to "/home/pi/Downloads".
Remove the "Downloads" portion, so that the "Extract to:" location becomes "/home/pi".
Also check the "Overwrite existing files" box.
Press "Extract" and wait until the red/green icon stays green (it takes a while)
Double-click the PanelPro icon and verify it starts OK, and that the new version # shows as expected.
Let me know if these directions help.
? SteveT"
