Locked Re: JMRI and NCE
|
Hello Ken C.,
toggle quoted message
Show quoted text
I double checked in Device Manager USB Interface using COMM4. When I start JMRI the Decoder Screen at bottom has NCE connected in green message. When I select a loco to program, the message changes to offline. How can I check that the USB Interface hardware connections are ok? Ken S. -----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Ken Cameron Sent: Tuesday, July 23, 2019 11:37 AM To: [email protected] Subject: Re: [jmriusers] JMRI and NCE Ken S, The cut/paste of the console log you sent shows JMRI asking for COM4, but the system saying COM4 not found. Insure everything is connected and powered up before starting JMRI. Also follow what I said before about using Windows Device Manager to confirm the hardware is really loading up at COM4 and no errors with drivers. We've found that Win10 updates sometimes disables drivers and they need to be loaded again. -Ken Cameron, Member JMRI Dev Team www.jmri.org www.fingerlakeslivesteamers.org www.cnymod.com www.syracusemodelrr.org |
Kenneth Skopp