Sorry for the trouble, and thanks for your efforts to track this down.
Could you post the stack trace you¡¯re seeing please?
Bob
On Dec 11, 2018, at 2:47 AM, Mick Moignard <mick@...> wrote:
I just upgraded my JMRI to 4.13.6, and I can¡¯t now get it to write indexed CVS in a Soundtraxx ECO-100 UK decoder. Non indexed CVS are ok, but as soon as it hits an indexed one I get first a 308 error and then a JMRI programmer in use error (not the 302 system programmer in use error), and the console shows a stack trace.
I¡¯ve localised it to Digitrax support. I¡¯ve tried connecting the DCS240 as both DCS240 and DCS100 with the same result, all via a LocobufferUSB. I can successfully write al the CVS to the loco with a SPROG, so the loco and decoder are not at fault.
I think this is a new issue with 4.13.6, as I don¡¯t recall having similar issues with 4.13.5. I have to go out now, but will be back in a few hours. I can try again then and post console info, anything else required?
--
Bob Jacobsen
rgj1927@...
Bob Jacobsen