There is a function within JMRI which will list all devices on the Cab Buss, not
sure where it is though.
With your AIU set to "0", that may cause a problem.
From NCE "Information Station"
PH Pro / PH10 (upto 2014) Total Cabs: 63 maximum (#2 - #64) This also includes
accessory items such as AIU, RB02, Mini Panels.
Others with more knowledge (Dave Heap for example) will most likely chime in
soon.
John
toggle quoted message
Show quoted text
---------- Original Message ----------
From: "Bob via Groups.Io" <GMRC405@...>
Date: August 14, 2018 at 8:25 AM
EPROM version is set for 2006 and later
AIU is set to 0
Baud rate is set to 9600 in Power Pro and JMRI
Com Port is on 6
I use a Belkin Serial to USB Model F5U409. I have had it ever since I started
using JMRI and never had a problems. I haven't used it that much with the
Power Pro system as I have a Power Cab system setup on my bench for programing
and setup of engines. Just started to try to use with the layout to monitor
cabs, backup and make changes to marco's which I have done in the past.
Bob
